CNC Machine Building Through Open Sources Projects and Programs
DOI:
https://doi.org/10.31686/ijier.vol8.iss9.2600Keywords:
CNC, Low cost, Opensource, Three axes, ArduinoAbstract
This research presents a theoretical and practical approach on the construction of a low-cost CNC machine, using as a base model found on the internet. Having his knowledge of movement that in the past was movement only one axis at a time, and in current controls movement on three simultaneous axes. The use of an Arduino micro controller will be the key part of the machine's operation, since it behaves like a PLC, starting from basic to advanced programming. The use of the project will end in its academic use and the dissemination of the technology used
References
AZEVEDO, Américo Luiz de. The beginnings of Computer Numerical Control. 2008 Available at: <https://www.cimm.com.br/portal/publicacao/220-os-primordios-do-controle-numerico>, Accessed on: 09 de jun. 2020
BETIOL, W. E. G., Stepper motor control applied to dot matrix printers. Curitiba, 1989.145 p.
COSTA, E. S. “Discipline: Machining Process”. Divinópolis, MG. 2006. 6 p. Available at:<https://www.passeidireto.com/multiplologinreturnUrl=%2Farquivo%2F2612591%2Fapo stila-processes-de-machining-cefet-mg>, Accessed on: 10 jun. 2020.
GROOVER, Mikell. Industrial Automation and Manufacturing Systems. 3rd Edition. São Paulo: CW, 2010.
KASSOUF, S. Elastic coupling without gap. Current mechatronics, São Paulo, December 2004. Number 19, 52 p.
LAMB, Frank. Industrial Automation in Practice. 2015 Available at: <https://books.google.com.br/books/about/Automa%C3%A7%C3%A3o_Industrial_na_Pr%C3%A1tica_S%C3%A9ri.html?id=X5XzCQAAQBAJ&redir_esc=y>, Acesso em 09 de jun.2020.
MACHADO, A. R. et al. Theory of material machining. 3rd ed. São Paulo: Blucher, 2015.
MAGGIO, Eduardo Gomes Ribeiro et al. A heuristic for scheduling the production of flexible manufacturing systems using modeling in Petri nets. 2005.
SANTOS, S. C.; SALES, W. F. Fundamentals of material machining. Belo Horizonte: CEFET-MG and PUC MINAS, Apostila, 2004.
SCHNEIDER. NEMA size 17 1.8 ° 2-phase stepper motor. [S.l: s.n., 2020]. Available in:<http://motion.schneider-electric.com/downloads/quickreference/NEMA17.pdf> Accessed on 31 jul. 2020.
STOETERAU, Rodrigo Lima. Design of Modern Machine Tools. Available at <http://sites.poli.usp.br/d/pmr2202/arquivos/aulas/PMR2202-AULA%20RS1.pdf> 2014. Federal University of Santa Catarina. Florianópolis, 2014. Accessed on 25 Mar. 2020.
SOUZA, Fabio. What is Arduino? 2013. Available at: <https://www.embarcados.com.br/arduino-uno/> Accessed on: 14 feb. 2020.
SOUZA, Adriano Fagali de; ULBRICH, Cristiane Brasil Lima. Integrated computer engineering and CAD / CAM / CNC systems. 2. ed. São Paulo: Artliber, 2013. Available at: <https://artliber.com.br/index.php?route=product/product&product_id=74> Accessed on 09 June. 2020.
Downloads
Published
Issue
Section
License
Copyright (c) 2020 André Amorim Gonçalves Xavier, Flavio Maldonado Bentes, Marcelo de Jesus Rodrigues da Nóbrega, Fabiano Battemarco da Silva Martins, Hildson Rodrigues de Queiroz
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Accepted 2020-08-28
Published 2020-09-01
