CAD / CAM Application for the Development of Submerged Pump Maintenance Tools
DOI:
https://doi.org/10.31686/ijier.vol7.iss11.1937Keywords:
CAD / CAM, Maintenance tools, MachiningAbstract
The design and implementation of maintenance tools is used in CAD / CAM tools, in order to make the necessary improvements in the whole process of disassembly of the equipment in question, and mainly to reduce the process time and eliminate the risk. breaking the most fragile parts of the equipment. The objective of the work is to elaborate the toolkit, to reduce the disassembly time and to eliminate damage to the equipment and its respective trajectories, with which the machine performs the machining of the designed drawing, were applied to the resources through a CNC language. (Computer Numeric Command) on a CNC lathe and a machining center. The elaboration of this project based on a CAD system, in this case Solid Works. The average time for disassembly of the equipment was around 2h, now with the proper use of tools, the same process had a time drop to 40 minutes, seen as a great time saving in the disassembly process.
Downloads
References
[2] BIDER, I.; JALALI, A. Agile business process development: why, how and when— applying Nonaka’s theory of knowledge transformation to business process development. v. 14, p. 693-731, 2016.
[3] Capote, G. (2011) “Guia para Formação de Analistas de Processos – BPM”, 1ª edição, Rio de Janeiro, 2011, 328p.
[4] KLUSKA, R. A.; LIMA, E. P.; COSTA, S. E. G. Uma proposta de estrutura e utilização do Gerenciamento de Processos de Negócio (BPM). Revista Produção Online, v. 15, n. 3, p. 886-913, 2015. https://doi.org/10.14488/1676-1901.v15i3.1867.
[5] Cruz, T. (2011) “Sistemas, Métodos e Processos: Administrando Organizações por meio de Processos de Negócios”, 2°. edição. – São Paulo: Atlas, 2011.
[6] MARTINS, P. V.; ZACARIAS, M. An Agile Business Process Improvement Methodology. Procedia Computer Science, v. 121, p. 129–136, 2017. https://doi.org/10.1016/j.procs.2017.11.018.
[7] ENSSLIN, L.; et al. BPM governance: a literature analysis of performance evaluation. Business Process Management Journal, v. 23, n. 1, pp. 71-86, 2017. https://doi.org/10.1108/BPMJ-11-2015-0159.
[8] MIYAZAKI, T. et al. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dental materials journal. Japan, p. 1-13, 2009.
[9] Rinke S, Fornefett D, Gersdorff N, Lange K, Roediger M. Multifactorial analysis of the impact of different manufacturing processes on the marginal fit of zirconia copings. Dent Mater J. 2012;31 (4):601 -9.
[10] BISCARO, L. et al. An In Vivo Evaluation of Fit of Zirconium-Oxide Based Ceramic Single Crowns, Generated with Two CAD/CAM Systems, in Comparison to Metal Ceramic Single Crowns. Journal of Prosthodontics, v. 22 , 2013.
[11] VANLIOGLU, B. A. et al. Internal and marginal adaptation of pressable and computer-aided design/computer-assisted manufacture onlay restorations. International Journal of Prosthodontics, v. 25, n. 3, 2012.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Jorge Fernando Rodrigues Valente, Giliane Corrêa Pereira, David Barbosa de Alencar, Carlos Alberto Oliveira de Freitas, Antônio Estanislau Sanches
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Most read articles by the same author(s)
- Carlos Santos de Almeida, Livia da Silva Oliveira, David Barbosa de Alencar, Ricardo Silva Parente, Headwather Recovery in Mindú Municipal Park: An Experience in Environmental Education , International Journal for Innovation Education and Research: Vol. 7 No. 10 (2019): International Journal for Innovation Education and Research
- Odson Costa de Almeida, Juliana da Cruz Brilhante, Fabiana Rocha Pinto, David Barbosa de Alencar, Manoel Henrique Reis Nascimento, Energy Efficiency and Sustainability and a Productive Industry in Manaus , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Gisele de Freitas Lopes, Manoel Henrique Reis Nascimento, Alexandra Amaro de Lima, Nadime Mustafa Moraes, José Roberto Lira Pinto Júnior, Ana Priscila Barbosa de Alencar, David Barbosa de Alencar, Application of the nonlinear autoregressive model with exogenous inputs for river level forecast in the Amazon , International Journal for Innovation Education and Research: Vol. 10 No. 3 (2022): International Journal for Innovation Education and Research
- Rilmar Pereira Gomes, Luane Beatriz da Silva Araújo, Marla Ingridh Rocha Guedes, Paulina Olímpio Mendonça, Manfrine Silva Santos, David Barbosa de Alencar, Global Positioning System – The use of the Achar Driving App to assist in the search for school driving in Manaus , International Journal for Innovation Education and Research: Vol. 10 No. 7 (2022): International Journal for Innovation Education and Research
- Rilmar Pereira Gomes, Francisco Luan Monteiro da Silva, Maria Correa Rodrigues Junior, Thiago de Carvalho Caetano do Vale, Zaida Maria Marques Tavares, David Barbosa de Alencar, Study of the Application of User Security Techniques in the Network , International Journal for Innovation Education and Research: Vol. 10 No. 7 (2022): International Journal for Innovation Education and Research