Implementation of Time and Method Studies for Improvement Continues in Productive Efficiency of the Mini System Production Line
DOI:
https://doi.org/10.31686/ijier.vol7.iss11.1959Keywords:
Times and Methods, Continuous improvement, Productive efficiencyAbstract
This article discusses the relevance of implementing a proposal that aims to apply the study of times and methods in the production line of the Mini System, a device that promises a sound with more power, quality and functionality produced by a company from Manaus Industrial Polo. The overall objective is to show that by calculating production times and methods it is possible to increase the company's capacity and reduce labor. The specific objectives are: to map the productive process; measure operation cycles, through time and production lead time; identify bottlenecks and constraints; identify losses; and propose improvement actions. Therefore, the methodology used was a biographical research, carried out through systematic studies in books, articles and websites; This was followed by field research through data collection in the Mini System assembly operation, focusing on the analysis of the total time spent on the production line. The results achieved with the study were put into practice, showing positive changes in efficiency, increased production, reduced labor and financial savings.
Downloads
References
FURLANI, Kleber. Estudos de Tempos. e Métodos. Disponível em: Acesso em: 26 ago.2011.
LOPETEGUI, M. et al. Time motion studies in healthcare: What are we talking about? Journal of Biomedical Informatics, v. 49, p. 292–299, 2014.
MAYNARD, H.B. Manual de Engenharia de Produção – Seção 5: Padrões de tempos elementares pré-determinados. São Paulo: Edgard Blücher, 1970.
MONTGOMERY, D.C. Introduction to statistical quality control. 5.ed. New York: John Wiley & Sons, 1996. 677p.
SLACK, N.: CHAMBERS, S.; JOHNSTON, R. – Administração da Produção – SP 2° edição - Editora Atlas, 2002.
TOLEDO, José Carlos de. Introdução ao CEP- Controle Estatístico de Processo. GEPEQ – Grupo de Estudo e Pesquisa em Qualidade DEP- UFSCar; 2006.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Fabrício dos Santos Silva, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Marden Eufrasio dos Santos
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Most read articles by the same author(s)
- Geilson Pires Ferreira, Giselane Campos Espadim, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, The Importance of (ECI / EIA) applied to substations and the 500kv Transmission Line Manaus – Boa Vista and the Socio-Environmental Changes of the Waimiri Atroari Indigenous Lands , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Jean Barros Félix, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Process Optimization on Rear Bumper Assembly in a PIM Two Wheels Poly Company , International Journal for Innovation Education and Research: Vol. 7 No. 9 (2019): International Journal for Innovation Education and Research
- Adilson Alves Góes, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, Proposal of LPS Implementation in Popular Buildings in Manaus City , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Brena Karine Pires Gaspar, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, Degrees of Risk of Environmental Impacts Arising from Irregular Occupations in the Northern Zone of Manaus - Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Evilly Cardoso Gomes, Mikelly Pinheiro Garcia, Igor Bezerra de Lima, David Barbosa de Alencar, Antônio Estanislau Sanches, Technological Control Assessment and Concrete Receiving , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Jorge Fernando Rodrigues Valente, Giliane Corrêa Pereira, David Barbosa de Alencar, Carlos Alberto Oliveira de Freitas, Antônio Estanislau Sanches, CAD / CAM Application for the Development of Submerged Pump Maintenance Tools , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Ruan Mattheus Ferreira Braga, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, Low Cost Process Modeling for a Manaus Industrial Polo factory , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Anderson de Jesus Lopes Castro, Fabiana Rocha Pinto, David Barbosa de Alencar, Ricardo Silva Parente, Mobile Android APP Proposal Using an Inventor Platform Applied to Energy Efficiency and Sustainability , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Alyne Carvalho Farias, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Application of queuing theory to a financial institution in the public service sector in the city of Manaus , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Alexandre Vieira de Oliveira, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Manoel Henrique Reis Nascimento, Carlos Alberto Oliveira de Freitas, Factory Location Decision Making Based on the FUZZY Inference Model , International Journal for Innovation Education and Research: Vol. 7 No. 10 (2019): International Journal for Innovation Education and Research