Implementation of Time and Method Studies for Improvement Continues in Productive Efficiency of the Mini System Production Line
DOI:
https://doi.org/10.31686/ijier.vol7.iss11.1959Keywords:
Times and Methods, Continuous improvement, Productive efficiencyAbstract
This article discusses the relevance of implementing a proposal that aims to apply the study of times and methods in the production line of the Mini System, a device that promises a sound with more power, quality and functionality produced by a company from Manaus Industrial Polo. The overall objective is to show that by calculating production times and methods it is possible to increase the company's capacity and reduce labor. The specific objectives are: to map the productive process; measure operation cycles, through time and production lead time; identify bottlenecks and constraints; identify losses; and propose improvement actions. Therefore, the methodology used was a biographical research, carried out through systematic studies in books, articles and websites; This was followed by field research through data collection in the Mini System assembly operation, focusing on the analysis of the total time spent on the production line. The results achieved with the study were put into practice, showing positive changes in efficiency, increased production, reduced labor and financial savings.
Downloads
References
FURLANI, Kleber. Estudos de Tempos. e Métodos. Disponível em: Acesso em: 26 ago.2011.
LOPETEGUI, M. et al. Time motion studies in healthcare: What are we talking about? Journal of Biomedical Informatics, v. 49, p. 292–299, 2014.
MAYNARD, H.B. Manual de Engenharia de Produção – Seção 5: Padrões de tempos elementares pré-determinados. São Paulo: Edgard Blücher, 1970.
MONTGOMERY, D.C. Introduction to statistical quality control. 5.ed. New York: John Wiley & Sons, 1996. 677p.
SLACK, N.: CHAMBERS, S.; JOHNSTON, R. – Administração da Produção – SP 2° edição - Editora Atlas, 2002.
TOLEDO, José Carlos de. Introdução ao CEP- Controle Estatístico de Processo. GEPEQ – Grupo de Estudo e Pesquisa em Qualidade DEP- UFSCar; 2006.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Fabrício dos Santos Silva, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Marden Eufrasio dos Santos
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Most read articles by the same author(s)
- Cleibia Assunção de Lira, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Implementation of the OEE Indicator in the Welding Process in an Air Conditioning Factory in Manaus City , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Samuel Cameli Fernandes, Laerte Melo Barros, Rodrigo Paz Barros, Pedro Felix Liotto, David Barbosa de Alencar, Concrete Production Using Fine Glass Aggregates as Partial Replacement of Sand , International Journal for Innovation Education and Research: Vol. 7 No. 12 (2019): International Journal for Innovation Education and Research
- Oéssimo Mesquita Padilha, Alexandra Priscilla Tregue Costa, David Barbosa de Alencar, Antônio Estanislau Sanches, Application of SWOT Analysis for Optimizing the Process of an Automotive Services Company , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Wendel Júlio Silva Barroso, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Implementation of 5S Program in a Building Site of a Predial Reform in Manaus City , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Luã Platão Seabra Paiva, Livia da Silva Oliveira, David Barbosa de Alencar, Paulo Oliveira Siqueira Júnior, Predictive Maintenance Through Thermographic Analysis: Case Study in a Manaus Industrial Pole Company , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Marcos Raiker Printes Ferreira, David Barbosa de Alencar, Felipe Wilson Leão da Silva, Fábio Martins da Silva, Consuelo Alves da Frota, Influence of Milled Material and Construction Waste on the Properties of a Typical Soil of Iranduba City - AM / BR , International Journal for Innovation Education and Research: Vol. 7 No. 12 (2019): International Journal for Innovation Education and Research
- Oneida Ribeiro Tavares, Fabiana Rocha Pinto, David Barbosa de Alencar, Manoel Henrique Reis Nascimento, Piezoelectric Energy Characterization: Materials and Utilization , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Rilmar Pereira Gomes, Aline Siqueira Tavares, Eny Alves Martins, Matheus da Silva Pereira Alves, Jean Mark Lobo de Oliveira, David Barbosa de Alencar, Information Security in the use of drones , International Journal for Innovation Education and Research: Vol. 10 No. 7 (2022): International Journal for Innovation Education and Research
- Lourival Cordeiro da Silva, Viviane Cristiny dos Santos Mendonça, Igor Bezerra de Lima, David Barbosa de Alencar, Camily Murrieta Vasconcelos Oliveira Bezerra, Preventive and Corrective Predial Inspection and Maintenance: A Case Study in a Residential Building in Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Lorena Reis Sales, Richarles da Silva Soares, Sara dos Santos Santarém, Frank Henrique Santos Fontineles, David Barbosa de Alencar, Antônio Estanislau Sanches, Comparative Analysis of the Constructive Process with the Drain Manual in a Project in Manaus City , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research