Concrete Production Using Fine Glass Aggregates as Partial Replacement of Sand
DOI:
https://doi.org/10.31686/ijier.vol7.iss12.2092Keywords:
Reuse, glass waste, substitution, fine aggregate, mechanical propertiesAbstract
Waste reuse is considered an excellent alternative for sustainable development. For the World Commission on Environment and Development in Our Common Future, sustainability is "one that meets the needs of the present without compromising the ability of future generations to meet their needs." One way to provide a sustainable solution for glass would be the reuse of glass waste in the production of concrete. Glass residues when suitably crushed and sieved, to assume appropriate granulometry, may exhibit characteristics similar to natural aggregates. The use of glass waste when used in concrete manufacturing reduces production costs. The main objective of the research was to replace, as much as possible, in percentage, the quantity of sand and gravel aggregates by glass waste with the same granulometry, as a way to reduce costs, reduce the use of raw materials and reduce the quantity of wastes that were inadequately disposed of in landfills. Samples of glass waste were collected in the construction industry itself, in works and glassware companies that work with cutting and delivery of the product. Comparisons were made between concretes produced with natural and concrete aggregates produced with the substitution of 20%, 30%, 40% and 50% of the fine aggregate, all of which glass was used as a substitute. The comparative analyzes were the mechanical properties of compression strength and diametral compression traction at 7, 14, 21, 28 and 90 days.
Downloads
References
[2] IPEA, INSTITUTO DE PESQUISA ECONÔMICA APLICADA. Diagnóstico dos Resíduos Sólidos Urbanos – Relatório de Pesquisa. Brasília, 2012.
[3] SEMULSP - SECRETARIA MUNICIPAL DE LIMPEZA PÚBLICA. Disponível em:http://www. http://semulsp.manaus.am.gov.br/. Acesso em: 8 de jun. 2014.
[4] TOPCU I.B.; CANBAZ M. Properties of concrete containing waste glass. Cement and Concrete . Research, Volume 34, Issue 2, p. 267-274 February 2004.
[5]VIJAYAKUMAR G.; VISHALINY, H.; GOVINDARAJULU D. Studies on Glass Powder as Partial Replacement of Cement in Concrete Production. International Journal of Emerging Technology and Advanced Engineering, February 2013.
[6] BAUER, E. Revestimento de argamassa: características e peculiaridades. Brasília: LEM- UnB; SINDUSCON, 2005.
[7] ABNT, ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR 7211:Agregados para concreto. Rio de Janeiro, 2009.
[8] MEYER, C. The greeningofthe concrete industry. Cementand Concrete Composites, New York, 04 january 2009. 601-605.
[9] LIMA, G. C. T. Análise de sustentabilidade econômica da coleta seletiva. Dissertação de Mestrado – Universidade Estadual Paulista, Ilha Solteira, SP, 2010.
[10] XU, A.; SHAYAM, A. Value – added utilization of waste glass in concrete. Cement and concrete research, 2004.
[11] PARK, S. B.; LEE, B. C.; KIM, J. H. Studies on mechanical properties of concrete containing waste glass aggregate. Cement and Concrete Research, 2004.
[12] MAGESWARI, M.; VIDIVELLI, B. The Use of Sheet Glass Powder as Fine Aggregate Replacement in Concrete.The Open Civil Engineering Journal, 2010. 65-71.
[13] BARROS, L. M. Concreto de alta resistência a partir de matérias-primas azônicas e vidro reciclado. Tese (Doutorado em Engenharia de Materiais) Escola de Engenharia de São Carlos. São Carlos, 2016.
[14] TURGUT, P.; YAHLIZADE, E. S. Research into Concrete Blocks with Waste Glass. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 2009.
[15] CORINALDESI, V. et al. Reuse of ground waste glass as aggregate for mortars. Waste Management, jan. 2005. pp. 197–201.
[16] ABDULRAHAMAN B. A. & ABDALLAH FAN. Critical Success Factors in project management: critical review of secondary data. Int. J. Sci. Eng. Res. 5 (6) 325-31. 2014.
[17]ISMAIL Z. Z.; AL-HASHMI E. A. Recycling of waste glass as a partial replacement for fine aggregate in concrete, v. 29, p. 655-659, feb. 2009.
[18] MALIK, M, BASHIR, M, AHMED, S, TARIQ, T & CHOWDHARY, U., “Study of concrete involving use of waste glass as partial replacement of fine aggregates”, IOSR. J. Eng., vol. 3, no.7, pp.8–13 2013.
[19] ABNT, ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR NM 248: Agregados - Determinação da composição granulométrica. Rio de Janeiro, 2003.
[20] ABNT, ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR NM 45: Agregado em estado solto - Determinação da massa unitária.Rio de Janeiro, 2006.
[21] ABNT, ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR NM 52:Agregado miúdo - Determinação da massa específica e massa específica aparente. Rio de Janeiro, 2009.
[22] ABNT, ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR 5739: Concreto - Ensaios de compressão de corpos de prova cilíndricos. Rio de Janeiro, 2018.
[23] ABNT, ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. NBR NM 248: Agregados - Determinação da composição granulométrica. Rio de Janeiro, 2003.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Samuel Cameli Fernandes, Laerte Melo Barros, Rodrigo Paz Barros, Pedro Felix Liotto, David Barbosa de Alencar
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
