Application of methodology 5s in an industrial assembly company in the City of Manaus, AM

Authors

DOI:

https://doi.org/10.31686/ijier.vol11.iss2.4090

Keywords:

5S Program, Quality, Improvement

Abstract

The 5S Program is used to promote quality management in any business environment that seeks growth in its niche, minimizing process losses, costs and waste, increasing production and product quality. Thus, this article aims to demonstrate the improvements implemented with the application of the 5S Program in the machining sector in an assembly company Manaus Industrial Pole (PIM) that focuses on a pull production system. The research is of an applied nature, consisting of a bibliographical survey and a case study in the assembly company from July to October 2022. In the application of the tolerated meanings, the organization of items that were being used, as well as those that admitted were unused, disposal of worn-out materials that could no longer be used, accommodation of tools and equipment in their proper places, so that everyone could have access. The sense of cleanliness was applied to the use of cleaning kits allocated in supports oriented to the five production lines of the machining sector. The sense of standardization determined the cleaning of the machines in three stages, in a total time of 6 minutes, the sense of self-discipline, requires verification with more time, to identify whether the principles become a company culture. The benefits identified from the implementation of 5S are the elimination of waste, optimization of time and space, teamwork, improvements in health, reduction of accidents etc.

Downloads

Download data is not yet available.

Author Biographies

  • Newton Koity Anami Donomai, Estácio do Amazonas

    Student Production Engineering

  • Fabiana Rocha Pinto, Faculdade Estácio do Amazonas

    Advisor, Dra

References

JAHARA, R.; SENNA, P. Implementation of the 5s program in a metallurgical industry: A case study. Journal of Lean Systems, v. 1, n. 3, p. 18-29, 2016.

BARBOSA, B. A.; CARVALHO, I. H. S.; SANTOS, R. F.; CARVALHO, A. L. Implementation of 5S methodology in an industry of Minas Gerais manufacturer of electrome[3] NEVES, G. R. S.; LEONI, J. N. Application of the 5s in a mechanical metal industry in the interior of São Paulo. UniToledo Action Engineering Magazine, v. 4, n. 2, 2019.

GOBIS, M. A.; CAMPANATTI, R. The benefits of applying quality management tools within the food industries. Horus, v. 7, n. 1, p. 26-40, 2017.

SANTOS, C. K. M.; SILVA, H. G. B.; RODRIGUES, L. F.; SILVA, T. M.; CARNEIRO, M. B.; COSTA, F. H. O.; TABAH, J. Application of Quality Management Tools in the Cutting Sector of a Footwear Industry. Creare-Revista das Engenharias, v. 2, n. 1, 2019.

CARPINETTI, L. C. R. Quality management: concepts and techniques. 2. ed. São Paulo: Atlas, 2012.

De SÃO PEDRO FILHO, F.; MADEIRA, M. J. A.; ARENHARDT V.; ALMEIDA M. G. A.; MIRANDA JUNIOR J. J. S. Application of the PDCA cycle in production quality management. Applied Interdisciplinary Journal of Scientific Research, v. 11, n. 2, p. 17-30, 2017.

PIZONI, R.; SILVA, L. G. P.; PALADINI, E. P. Shared economy: Quality management applied to a food delivery company. Pretexto Magazine, p. 66-75, 2018.

SANTOS, M. S.; SILVEIRA, G. H. O.; PEIXOTO, M. G. M. Quality Management and Brazilian Agribusiness: Proposal for Application of Process Management in an Animal Feed Factory of Alto Paranaíba. Brazilian Journal of Management and Engineering| RBGE| ISSN 2237-1664, n. 20, p. 100-126, 2019.

BUER, Sven-Vegard; STRANDHAGEN, J. O.; CHAN, F.T.S. The link between Industry 4.0 and lean manufacturing: mapping current research and establishing a research agenda. International Journal of Research in Production. v. 56, n. 8, p. 2924-2940, 2018. DOI: https://doi.org/10.1080/00207543.2018.1442945

SANDERS, A. ELANGESWARAN, C.; WULFSBERG, J. P. Industry 4.0 implies lean manufacturing: research activities in industry 4.0 function as facilitators of lean manufacturing. Journal of Engineering and Industrial Management (JIEM), v. 9, n. 3, p. 811-833, 2016. DOI: https://doi.org/10.3926/jiem.1940

MARODIN, G. A.; FRANK, A.G.; TORTORELLA, L.G.; FETTERMAN, D. C. Lean production and operational performance in the Brazilian automotive supply chain. 2012.

ARTILHA-MESQUITA, A. F.; STAFUSSA, A. P.; PARADISE, C. M.; RODRIGUES, L. M.; SILVA, L.A.; SANTOS, S. S. MARINS, A. R.; MADRONA, G.S. Evaluation of Quality Management and its tools: applicability in the animal food industry. Research, Society and Development, v. 10, n. 1, p. e20210111248-e20210111248, 2021. DOI: https://doi.org/10.33448/rsd-v10i1.11248

TAJRA, S.; RIBEIRO, J. Inovação na prática: Design thinking and tools applied to startups. 1 ed. [S. I.]: Alta Books, 2020.

SOUZA, B. C.; ALCÂNTARA PINTO, G.; PARREIRA PAULA, P.; WOLF, R. J.; SOUZA, F. V. P. Implementation of the 5S program through the DMAIC methodology. Brazilian Journal of Development, v. 4, n. 5, p. 2163-2179, 2018.

chanical products. Connect! Interdisciplinary Extension Journal, v. 1, n. 2, p. 60-72, 2017.

ALTENHOFEN, J. L.; FLEIG, R.; BIRTH, I. B.; KEINE, S. Workers' Perception of the 5S. Product & Production Program, v. 19, n. 2, 2018.

RECH, G. C. Visual devices as support for rapid tool change: the experience of a metallurgical. 2004. 105f. Dissertation -Federal University of Rio Grande do Sul, Porto Alegre, 2004.

COAST, B. W. C.; SOUZA, F. A. Analysis of the 5S program and quality tool applications by production engineering students. In: SERGIPE PRODUCTION ENGINEERING SYMPOSIUM, 9., 2017, São Cristóvão. The anais [...]. São Cristóvão: DEPRO/UFS, 2017, p. 205-217.

PRESTES. M. L.M. The research and construction of scientific knowledge. 3. Ed., 1 reimp, São Paulo: Rêspel editora, 2008.

PRODANOV, C.C.; FREITAS, E. C. Methodology of scientific work. 2 ed. New Hamburg: Feevale University, 2013.

PASOLINI, M.; FRANCO, M. M.; VIDOR, G. Implementation of the 5s program in the maintenance sector of a company in the mechanical metal industry: a case study. In: NATIONAL MEETING OF ENGINEERING PRODUCTION, 37., Joinville, SC, Brazil, 2017. Anais [...], Joinville: ABEPRO, 2017.

Downloads

Published

2023-02-02

How to Cite

Donomai, N. K. A., & Rocha Pinto, F. (2023). Application of methodology 5s in an industrial assembly company in the City of Manaus, AM. International Journal for Innovation Education and Research, 11(2), 114-126. https://doi.org/10.31686/ijier.vol11.iss2.4090

Most read articles by the same author(s)

<< < 1 2 3 4 > >>