Reducing Process Setup in a Smart TV Card Factory
DOI:
https://doi.org/10.31686/ijier.vol7.iss11.1861Keywords:
Production, Setup Time ReductionAbstract
Companies are looking for new ways to carry out their processes automatically and accurately. Thus, the machines that are part of the process need to be stopped, called setup, so that they are prepared to continue producing other products on the production line. This work was developed with the main objective of showing the effect of reducing the setup time in a television factory, and as specific objectives to present the concept of Fast Tool Change; present the negative effects of a production that has a lengthy setup; punctuate the benefits of reducing setup time in a factory. The methodology used is focused on exploratory research where it was necessary to visit the production line of a 32 ", 42", 50 "and 55" Smart TV board manufacturing company, in order to apply the data collection instruments. To verify the failures resulting from the shutdowns and the problems that are related to the production setup time, quality tools such as Ishikawa Diagram, 5W2H and before and after study flowchart were used. As expected results, the company was able to reduce machine preparation delays, batch delays became minimal.
Downloads
References
[2] KARASU, M.K.Improvement of changeover times via Taguchi empowered SMED/case study on injection molding production. Measurement, vol.47, p.741–748, January 2014.
[3] SINGH, B.J.; KHANDUJA, D. SMED: for quick changeovers in foundry SMEs. International Journal of Productivity and Performance Management, vol.59, n.1, p.98–116, 2010.
[4] SING, B.J.; KHANDUJA, D. SMED: for quick changeovers in foundry SMEs. International Journal of Productivity and Performance Management, v. 59, n.1, 2010.
[5] CAKMAKCI, M. Process improvement: performance analysis of the setup time reduction-SMED in the automobile industry. International Journal of Advanced Manufacturing Technology, v. 41, n. 1-2, p. 168-179, 2009.
[6] JESUS, A.G; NASCIMENTO, M.H.R; RIBEIRO, P.F.S. Reduced Setup Time for an SMT Line. Journal of Engineering and Technology for Industrial Applications, Edition. 15.Vol: 04. 2018.
[7] CAMILO, E. Propostas de design de layout da PCI para redução de curto circuito de solda a onda, para processo de montagem de placa eletrônica. Campinas- SP. 2015.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Diana Trindade Duarte, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Most read articles by the same author(s)
- Ronaldo Lopes Gomes, Ricardo Chamy do Nascimento, Caio Victor da Silva Viga, Bruno Pereira Gonçalves, Jean Mark Lobo de Oliveira, Rilmar Pereira Gomes, David Barbosa de Alencar, Introduction of Basic Computer Programming Logic in Elementary and High Schools Using Logic Block , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- João Vitor Barros Assunção, Renan Phelipe Rodrigues Pantoja, Bruno Pereira Gonçalves, David Barbosa de Alencar, Jean Mark Lobo de Oliveira, Comparative Analysis Between Native and Hybrid Mobile Applications , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Dayana de Lira Martins da Silva, Flavia Emanuele Rosas Costa, Igor Bezerra de Lima, David Barbosa de Alencar, Ricardo Silva Parente, Proposals for Reducing Damage Caused by Dams Collapse in Pitinga - Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Paulo Moisés Godinho Feitosa, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Manoel Henrique Reis Nascimento, Scrap Cost Reduction Process Improvement Actions in a Microwave Assembly Plant , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- João Bosco Rodrigues Pereira, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Methodology for Indirect Material Control in a White Line Company , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Gabriel Barbosa Soares, Djanielson de Oliveira Pereira, Livia da Silva Oliveira, David Barbosa de Alencar, Manoel Henrique Reis Nascimento, Implementation of the TN-C-S Scheme in an Ungrounded Low Voltage Electrical Installation in Manaus / AM , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Jessica Santana da Silva, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, Energy Efficiency Analysis in a Higher Education Institution in Manaus - Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Nilzemar da Silva Mariano, Livia da Silva Oliveira, David Barbosa de Alencar, Eliton Smith dos Santos, Economic Feasibility Study Generated on Replacing Tubular Fluorescent Lamps with Led Lamps in a Commercial Building , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Alessandro Marques Martins, Érica Pantoja de Araújo, Frank Henrique Santos Fontineles, Sara dos Santos Santarém, David Barbosa de Alencar, Gisele de Freitas Lopes, The Socioeconomic Impact of Paralyzed Public Works: Analysis on the University City of the State of Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Vinícius Guilherme Pereira Vasconcelos, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Marden Eufrasio dos Santos, Proposal for an Araçá-Boi Fruit Mead Factory in the Amazon Region , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research