Proposal for the development of burn-in inline
DOI:
https://doi.org/10.31686/ijier.vol9.iss9.3317Keywords:
Burn-In Inline, Modernization, Advanced ManufacturingAbstract
Advanced manufacturing promises to significantly impact the economy in various branches and industrial segments, such as metallurgy and agribusiness. Therefore, the aim is to develop a new product implemented at the company Transire, an automated system for storage in a controlled temperature environment, testing and test monitoring in real-time of its final products. Thus, this article can be considered exploratory, applied, and qualitative under the aspects of bibliographical research and case studies. Data collection was through meetings with company professionals, technical visits, and research on the importance of the topic. The results showed that the main stages of development of the Burn-In Inline were validated and that studies of production capacity associated with these developments can generate factory modernization and greater competitiveness among companies in the field
References
GötZ, Marta; Jankowska, Barbara. Clusters and Industry 4.0–do they fit together?. European Planning Studies, v. 25, n. 9, p. 1633-1653, 2017. DOI: https://doi.org/10.1080/09654313.2017.1327037
Bartodziej, Christoph Jan. The concept industry 4.0. In: The concept industry 4.0. Springer Gabler, Wiesbaden, 2017. p. 27-50. DOI: https://doi.org/10.1007/978-3-658-16502-4_3
Xu, Li Da; Xu, Eric L.; LI, Ling. Industry 4.0: state of the art and future trends. International Journal of Production Research, v. 56, n. 8, p. 2941-2962, 2018. DOI: https://doi.org/10.1080/00207543.2018.1444806
Schwab, Klaus. The fourth industrial revolution. Currency, 2017.
Elmaraghy, Hoda et al. Product variety management. Cirp Annals, v. 62, n. 2, p. 629-652, 2013. DOI: https://doi.org/10.1016/j.cirp.2013.05.007
Oztemel, Ercan; Gursev, Samet. Literature review of Industry 4.0 and related technologies. Journal of Intelligent Manufacturing, v. 31, n. 1, p. 127-182, 2020. DOI: https://doi.org/10.1007/s10845-018-1433-8
Wan, Jiafu et al. Software-defined industrial Internet of things in the context of industry 4.0. IEEE Sensors Journal, v. 16, n. 20, p. 7373-7380, 2016. DOI: https://doi.org/10.1109/JSEN.2016.2565621
Băjenescu, Titu I.; Băjenescu, Titu-Marius I.; Bâzu, Marius I. Component reliability for electronic systems. Artech House, 2010.
Bajenescu, Titu I.; Bazu, Marius I. Reliability of electronic components: a practical guide to electronic systems manufacturing. Springer Science & Business Media, 2012.
O'Connor, Patrick; Kleyner, Andre. Practical reliability engineering. John Wiley & Sons, 2012. DOI: https://doi.org/10.1002/9781119961260
Rip, Arie et al. Technological change. Human choice and climate change, v. 2, n. 2, p. 327-399, 1998.
Dodgson, Mark; Gann, David M.; Salter, Ammon. The management of technological innovation: strategy and practice. Oxford University Press on Demand, 2008.
Sharma, Sanghmitra. Reliability Accelerated Models. 2010. Tese de Doutorado. Aligarh Muslim University Aligarh (INDIA).
Ireson, W. Grant; Coombs Jr., Clyde F.; MOSS, Richard Y. Handbook of Reliability Engineering and Management. 2. ed. New York, United States of America: McGraw-Hill, 1996. ISBN 0-07-012750-6.
Yang, Guang. Life cycle reliability engineering. John Wiley & Sons, 2007. DOI: https://doi.org/10.1002/9780470117880
Wasserman, Gary. Reliability verification, testing, and analysis in engineering design. CRC Press, 2002. DOI: https://doi.org/10.1201/9780203910443
Reliasoft Corporation. Understanding Accelerated Life-Testing Analysis. In: Simpósio Internacional de Confiabilidade, 2003, Rio de Janeiro, Brasil. 16 p.
Tsai, M. T., & Tsai, C. (2000). Energy recycling for electrical AC power source burn-in test. IEEE Transactions on Industrial Electronics, 47(4), 974-976. DOI: https://doi.org/10.1109/41.857979
Vassilou, P. e Meetas, A. Understanding accelerated life-testing analysis. Annual Reliability and Maintainability Symposium, pp. 1-14, 2003.
Nelson, Wayne B. Accelerated testing: statistical models, test plans, and data analysis. John Wiley & Sons, 2009.
Crowe, Dana; Feinberg, Alec (Ed.). Design for reliability. CRC press, 2017. DOI: https://doi.org/10.1201/9781420040845
Kaiser, Cletus J. (Ed.). The capacitor handbook. Springer Science & Business Media, 2012.
Groot, Jens et al. On the complex ageing characteristics of high-power LiFePO4/graphite battery cells cycled with high charge and discharge currents. Journal of Power Sources, v. 286, p. 475-487, 2015. DOI: https://doi.org/10.1016/j.jpowsour.2015.04.001
Thermotron Industries. Fundamentals of Accelerated Stress Testing. Holland, Michigan, United States of America: Thermotron Industries, 1998. 3p.
Assis, R. (2016). Testes de burn-in.
Jetter, James J.; Kariher, Peter. Solid-fuel household cook stoves: Characterization of performance and emissions. Biomass and Bioenergy, v. 33, n. 2, p. 294-305, 2009. DOI: https://doi.org/10.1016/j.biombioe.2008.05.014
Wensing, Michael et al. Ultra-fine particles release from hardcopy devices: sources, real-room measurements and efficiency of filter accessories. Science of the Total Environment, v. 407, n. 1, p. 418-427, 2008. DOI: https://doi.org/10.1016/j.scitotenv.2008.08.018
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Marcelo Maia do Nascimento, Jandecy Cabral Leite
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Accepted 2021-08-01
Published 2021-09-01
Most read articles by the same author(s)
- Mey Ling Oliveira da Silva, Simone da Silva, Jandecy Cabral Leite, Environmental education , International Journal for Innovation Education and Research: Vol. 10 No. 6 (2022): International Journal for Innovation Education and Research
- Eliton Smith dos Santos, Marcus Vinícius Alves Nunes, Jorge de Almeida Brito Júnior, Manoel Henrique Reis Nascimento, Jandecy Cabral Leite, David Barbosa de Alencar, Carlos Alberto Oliveira de Freitas, Efficient use of the Generators for the Environmental Economic Dispatch from the energy system, including solar photovoltaic generation , International Journal for Innovation Education and Research: Vol. 9 No. 7 (2021): International Journal for Innovation Education and Research
- Paulo Oliveira Siqueira Junior, Manoel Henrique Reis Nascimento, Ítalo Rodrigo Soares Silva, Ricardo Silva Parente, Milton Fonseca Júnior, Jandecy Cabral Leite, Computational meta-heuristics based on Machine Learning to optimize fuel consumption of vessels using diesel engines , International Journal for Innovation Education and Research: Vol. 9 No. 5 (2021): International Journal for Innovation Education and Research
- Ítalo Rodrigo Soares Silva, Manoel Henrique Reis Nascimento, Milton Fonseca Júnior, Ricardo Silva Parente, Paulo Oliveira Siqueira Júnior, Jandecy Cabral Leite, Bayesian Regularizers of Artificial Neural Networks applied to the reliability forecast of internal combustion machines in the short-term , International Journal for Innovation Education and Research: Vol. 9 No. 5 (2021): International Journal for Innovation Education and Research
- Alarico Gonçalves Nascimento Filho, Jandecy Cabral Leite, Manoel Henrique Reis Nascimento, Jorge Almeida Brito Junior, Carlos Alberto Oliveira de Freitas, Rafael Teles Rocha, Educational approach for fault detection in Internal Combustion Engines with Matlab Toolbox Fuzzy Logic , International Journal for Innovation Education and Research: Vol. 7 No. 8 (2019): International Journal for Innovation Education and Research
- Fabiano Franco França, Jandecy Cabral Leite, Optimization of the transfer process to the Municipalities and the Federal District - DF, of Law 13,240, of December 30, 2015 , International Journal for Innovation Education and Research: Vol. 9 No. 9 (2021): International Journal for Innovation Education and Research
- Hellen Lima Leite, Jandecy Cabral Leite, The importance of the environment in everyday school life , International Journal for Innovation Education and Research: Vol. 10 No. 12 (2022): International Journal for Innovation Education and Research