Analyzing Accidents in Civil Construction for Safety Work at Height
DOI:
https://doi.org/10.31686/ijier.vol7.iss11.1875Keywords:
Risk of falls, Safety, Brazilian Regulatory NormAbstract
In civil construction any and all services must be performed objectively and safely, especially the services at the height of the painter, where the employee is more exposed to the risk of falls and impacts of the user's own objects on lower limbs. Both the employee and the employer are responsible for everything that happens at the construction site, the employer providing safety devices and plans to minimize the rich of accidents while performing the services and the employee must obey any and all safety orders and plans aimed at not only your physical integrity but that of your colleagues doing services around you. Therefore this work will address the NR-6 regulations dealing with single use equipment, NR-18 which work conditions and environment in the construction industry and NR-35 work at height, which regulate service at height with the main focus.
Downloads
References
[2] RODRIGUES, Flavio Rivero. Prevenindo Acidentes na Construção Civil. 2ª. Ed. São Paulo: LTr, 2013.
[3] BRASIL. Decreto Lei 8.213/91, art. 20. Instituto Nacional de Previdência Social. Disponível em:<http://ftp.medicina.ufmg.br/osat/legislacao/Lei_8213_MPAS_220920 14.pdf>. Acesso em: 31 de agosto de 2019.
[4] SOUZA, Adeilton De Oliveira, trabalho em altura na construção civil e as medidas preventivas de segurança do trabalho, Monografia, Universidade Federal do Rio Grande do Norte, natal, 2017.
[5] ASSOCIAÇÃO BRASILIERA DE NORMAS TÉCNICAS. NR-35 Trabalho em altura, 2016. Disponível em:< http://trabalho.gov.br/images/Documentos/SST/NR/NR35.pdf>. Acesso em: 01 de novembro de 2019.
[6] MINISTÉRIO DO TRABALHO. Cartilha trabalho em altura. Brasília/DF, 27 de julho de 2018. Disponível em: < https://enit.trabalho.gov.br/portal/images/Cartilhas/Cartilha-trabalho-em-alturas-baixa.pdf>. Acesso em: 01 de novembro de 2019.
[7] AYRES, D. D. O.; CORRÊA, J. A. P. Manual de prevenção de acidentes do trabalho. 2ª. Ed. São Paulo: Atlas, 2011.
[8] MATTOS, U. A. O.; MÁSCULO, F. S. Higiene e Segurança do Trabalho. Rio de Janeiro: Elsevier/Abepro, 2011.
[9] JUNIOR, Adalberto Mohai Szabó. Manual de Segurança, Higiene e Medicina do Trabalho. 7ª Ed. São Paulo: Rideel, 2014.
[10] BRASIL. Decreto Lei 6.514/77. Dá segurança e da medicina do trabalho. Disponibilizado em:< http://www.planalto.gov.br/ccivil_03/LEIS/L6514.htm>. Acesso em: 31 de agosto de 2019.
[11] ASSOCIAÇÃO BRASILIERA DE NORMAS TÉCNICAS. NR-26 Sinalização de segurança, 2015. Disponível em:< https://enit.trabalho.gov.br/portal/images/Arquivos_SST/SST_NR/NR-26.pdf>. Acesso em: 31 de agosto de 2019.
[12] ASSOCIAÇÃO BRASILIERA DE NORMAS TÉCNICAS. NR 18 - Condições e meio ambiente de trabalho na indústria da construção, 2018. Disponível em:< https://enit.trabalho.gov.br/por tal/images/Arquivos_SST/SST_NR/NR-18.pdf >Acesso em: 31 de agosto de 2019.
[13] ASSOCIAÇÃO BRASILIERA DE NORMAS TÉCNICAS. NBR 6 - Equipamento de Proteção Individual, 2018. Disponível em:< https://enit.trabalho.gov.br/portal/images/Arquivos _SST/SST_NR/NR-06.pdf>. Acesso em: 31 de agosto de 2019.
[14] TAVARES, Jose da Cunha. Noções de prevenção e controle de perdas em segurança do trabalho. 8ª Ed. São Paulo: Senac, 2010.
[15] CIPA. A inovação no sistema de gerenciamento de EPIs: 3M Connected Safety. Disponível em: <http://revistacipa.com.br/inovacao-no-sistema-de-gerenciamento-de-epis-3m-connected-safety/>. Acesso em: 29 de agosto de 2019.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Daniel da Silva Damasceno, Josiane de Oliveira Martins, Frank Henrique Santos Fontineles, Sara dos Santos Santarém, David Barbosa de Alencar, Antônio Estanislau Sanches
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Most read articles by the same author(s)
- Geilson Pires Ferreira, Giselane Campos Espadim, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, The Importance of (ECI / EIA) applied to substations and the 500kv Transmission Line Manaus – Boa Vista and the Socio-Environmental Changes of the Waimiri Atroari Indigenous Lands , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Jean Barros Félix, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Process Optimization on Rear Bumper Assembly in a PIM Two Wheels Poly Company , International Journal for Innovation Education and Research: Vol. 7 No. 9 (2019): International Journal for Innovation Education and Research
- Adilson Alves Góes, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, Proposal of LPS Implementation in Popular Buildings in Manaus City , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Brena Karine Pires Gaspar, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, Degrees of Risk of Environmental Impacts Arising from Irregular Occupations in the Northern Zone of Manaus - Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Evilly Cardoso Gomes, Mikelly Pinheiro Garcia, Igor Bezerra de Lima, David Barbosa de Alencar, Antônio Estanislau Sanches, Technological Control Assessment and Concrete Receiving , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Jorge Fernando Rodrigues Valente, Giliane Corrêa Pereira, David Barbosa de Alencar, Carlos Alberto Oliveira de Freitas, Antônio Estanislau Sanches, CAD / CAM Application for the Development of Submerged Pump Maintenance Tools , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Ruan Mattheus Ferreira Braga, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, Low Cost Process Modeling for a Manaus Industrial Polo factory , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Anderson de Jesus Lopes Castro, Fabiana Rocha Pinto, David Barbosa de Alencar, Ricardo Silva Parente, Mobile Android APP Proposal Using an Inventor Platform Applied to Energy Efficiency and Sustainability , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Alyne Carvalho Farias, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Application of queuing theory to a financial institution in the public service sector in the city of Manaus , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Alexandre Vieira de Oliveira, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Manoel Henrique Reis Nascimento, Carlos Alberto Oliveira de Freitas, Factory Location Decision Making Based on the FUZZY Inference Model , International Journal for Innovation Education and Research: Vol. 7 No. 10 (2019): International Journal for Innovation Education and Research