Low Cost Process Modeling for a Manaus Industrial Polo factory
DOI:
https://doi.org/10.31686/ijier.vol7.iss11.1916Keywords:
Industrial Automation, Fourth Industrial Revolution, Cost Reduction, Process Management, Times and MethodsAbstract
Through the centuries man has found easier and better ways to produce the goods he needs and desires. Thus through new technologies through different forms of automation, manual processes of high physical risk and high financial cost are minimized. The aim of this paper is to show that industrial automation can be applied aiming at a low cost in its implementation, presenting a fast financial return time, besides improving the product quality, reducing the production defect rates and consequently the production increase. Article was based on the automation of a modem assembly cell, where it was necessary to use four (4) operators to assemble it, the modem had a defect index of 0.12% related to annual production. The result achieved showed that after the implementation of an automatic tightening machine, only one (1) operator is required to assist in assembly and one (1) defect rate per year dropped to 0.02% per year. Industrial automation has been showing companies the power to become more competitive in the world market. Thus, it becomes essential in the process of using technologies as a tool to support business management.
Downloads
References
COUTINHO, Luciano. A terceira revolução industrial e tecnológica. As grandes tendências das mudanças. Economia e Sociedade, [s.l.], v. 1, n. 1, p. 69-87, out. 2016. ISSN 1982-3533.
DAVILA, Tony. As regras da inovação, como gerenciar, como medir e como lucar. Porto Alegre: Bookman, 2009.
DENNIS, Pascal. Produção Lean Simplificada. 2ª ed. Porto Alegre, Bookman. 2008.
DRUCKER, P. O futuro já chegou. Revista Exame, [s.I], v. 8, n. 710, p.12-19, 22 mar. 2000.
FANTINATO, M. Métodos de pesquisa. Apresentação de aula, USP 2015.
GERHARDT, T.E.; SILVEIRA, D.T. Métodos de pesquisa. Universidade Aberta do Brasil – UAB/UFRGS e Curso de Graduação Tecnológica – Planejamento e Gestão para o Desenvolvimento Rural da SEAD/UFRGS. – Porto Alegre: Editora da UFRGS, 2009.
QIN, Jian; LIU, Ying; GROSVENOR, Roger. A Categorical Framework of Manufacturing for Industry 4.0 and Beyond. Procedia Cirp, [s.l.], v. 52, p.173-178, 2016. Elsevier BV. http://dx.doi.org/10.1016/j.procir.2016.08.005. Disponível em: <http://www.sciencedirect.com/science/article/pii/S221282711630854X?via=ihub#bibl0005>. Acesso em: 10 maio. 2019.
SILVEIRA, Paulo; SANTOS, Winderson. Automação e Controle Discreto. São Paulo: Érica, 10° edição, 2014.
SOUZA, Alceu; CLEMENTE, Ademir. Decisões financeiras e análise de investimentos: fundamentos, técnicas e aplicações. 6. ed. São Paulo: Atlas, 2012.
TAPPING, D.; SHUKER, T. Lean Office: gerenciamento do fluxo de valor para áreas adminitrativas – 8 passos para planejar, mapear e sustentar melhorias lean nas áreas administrativas. São Paulo: Editora Leopardo, 2010.
VASCONCELLOS, Marcos A. S. Garcia, M. E. Fundamentos de Economia. São Paulo: Saraiva, 5° edição, 2012.
ZHOU, Keliang; LIU, Taigang; ZHOU, Lifeng. Industry 4.0: Towards future industrial opportunities and challenges. 2015 12th International Conference on Fuzzy Systems and Knowledge Discovery (fskd), Zhangjiajie, p.2147-2152, ago. 2015. IEEE.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Ruan Mattheus Ferreira Braga, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes
![Creative Commons License](http://i.creativecommons.org/l/by-nd/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Most read articles by the same author(s)
- Vinícius Guilherme Pereira Vasconcelos, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Marden Eufrasio dos Santos, Proposal for an Araçá-Boi Fruit Mead Factory in the Amazon Region , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Geilson Pires Ferreira, Giselane Campos Espadim, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, The Importance of (ECI / EIA) applied to substations and the 500kv Transmission Line Manaus – Boa Vista and the Socio-Environmental Changes of the Waimiri Atroari Indigenous Lands , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Jean Barros Félix, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Process Optimization on Rear Bumper Assembly in a PIM Two Wheels Poly Company , International Journal for Innovation Education and Research: Vol. 7 No. 9 (2019): International Journal for Innovation Education and Research
- Adilson Alves Góes, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, Proposal of LPS Implementation in Popular Buildings in Manaus City , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Brena Karine Pires Gaspar, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, Degrees of Risk of Environmental Impacts Arising from Irregular Occupations in the Northern Zone of Manaus - Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Evilly Cardoso Gomes, Mikelly Pinheiro Garcia, Igor Bezerra de Lima, David Barbosa de Alencar, Antônio Estanislau Sanches, Technological Control Assessment and Concrete Receiving , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Jorge Fernando Rodrigues Valente, Giliane Corrêa Pereira, David Barbosa de Alencar, Carlos Alberto Oliveira de Freitas, Antônio Estanislau Sanches, CAD / CAM Application for the Development of Submerged Pump Maintenance Tools , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Anderson de Jesus Lopes Castro, Fabiana Rocha Pinto, David Barbosa de Alencar, Ricardo Silva Parente, Mobile Android APP Proposal Using an Inventor Platform Applied to Energy Efficiency and Sustainability , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Alyne Carvalho Farias, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Application of queuing theory to a financial institution in the public service sector in the city of Manaus , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Alexandre Vieira de Oliveira, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Manoel Henrique Reis Nascimento, Carlos Alberto Oliveira de Freitas, Factory Location Decision Making Based on the FUZZY Inference Model , International Journal for Innovation Education and Research: Vol. 7 No. 10 (2019): International Journal for Innovation Education and Research