CAD / CAM Application for the Development of Submerged Pump Maintenance Tools
DOI:
https://doi.org/10.31686/ijier.vol7.iss11.1937Keywords:
CAD / CAM, Maintenance tools, MachiningAbstract
The design and implementation of maintenance tools is used in CAD / CAM tools, in order to make the necessary improvements in the whole process of disassembly of the equipment in question, and mainly to reduce the process time and eliminate the risk. breaking the most fragile parts of the equipment. The objective of the work is to elaborate the toolkit, to reduce the disassembly time and to eliminate damage to the equipment and its respective trajectories, with which the machine performs the machining of the designed drawing, were applied to the resources through a CNC language. (Computer Numeric Command) on a CNC lathe and a machining center. The elaboration of this project based on a CAD system, in this case Solid Works. The average time for disassembly of the equipment was around 2h, now with the proper use of tools, the same process had a time drop to 40 minutes, seen as a great time saving in the disassembly process.
References
[1] COSTA, A. P. R.; FERREIRA, R. C.; LEAL, F. Mapeamento de processos em uma unidade hospitalar: Proposta de Melhorias baseadas em conceitos Lean In, Fortaleza-Ceara, 2015.
[2] BIDER, I.; JALALI, A. Agile business process development: why, how and when— applying Nonaka’s theory of knowledge transformation to business process development. v. 14, p. 693-731, 2016.
[3] Capote, G. (2011) “Guia para Formação de Analistas de Processos – BPM”, 1ª edição, Rio de Janeiro, 2011, 328p.
[4] KLUSKA, R. A.; LIMA, E. P.; COSTA, S. E. G. Uma proposta de estrutura e utilização do Gerenciamento de Processos de Negócio (BPM). Revista Produção Online, v. 15, n. 3, p. 886-913, 2015. https://doi.org/10.14488/1676-1901.v15i3.1867.
[5] Cruz, T. (2011) “Sistemas, Métodos e Processos: Administrando Organizações por meio de Processos de Negócios”, 2°. edição. – São Paulo: Atlas, 2011.
[6] MARTINS, P. V.; ZACARIAS, M. An Agile Business Process Improvement Methodology. Procedia Computer Science, v. 121, p. 129–136, 2017. https://doi.org/10.1016/j.procs.2017.11.018.
[7] ENSSLIN, L.; et al. BPM governance: a literature analysis of performance evaluation. Business Process Management Journal, v. 23, n. 1, pp. 71-86, 2017. https://doi.org/10.1108/BPMJ-11-2015-0159.
[8] MIYAZAKI, T. et al. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dental materials journal. Japan, p. 1-13, 2009.
[9] Rinke S, Fornefett D, Gersdorff N, Lange K, Roediger M. Multifactorial analysis of the impact of different manufacturing processes on the marginal fit of zirconia copings. Dent Mater J. 2012;31 (4):601 -9.
[10] BISCARO, L. et al. An In Vivo Evaluation of Fit of Zirconium-Oxide Based Ceramic Single Crowns, Generated with Two CAD/CAM Systems, in Comparison to Metal Ceramic Single Crowns. Journal of Prosthodontics, v. 22 , 2013.
[11] VANLIOGLU, B. A. et al. Internal and marginal adaptation of pressable and computer-aided design/computer-assisted manufacture onlay restorations. International Journal of Prosthodontics, v. 25, n. 3, 2012.
[2] BIDER, I.; JALALI, A. Agile business process development: why, how and when— applying Nonaka’s theory of knowledge transformation to business process development. v. 14, p. 693-731, 2016.
[3] Capote, G. (2011) “Guia para Formação de Analistas de Processos – BPM”, 1ª edição, Rio de Janeiro, 2011, 328p.
[4] KLUSKA, R. A.; LIMA, E. P.; COSTA, S. E. G. Uma proposta de estrutura e utilização do Gerenciamento de Processos de Negócio (BPM). Revista Produção Online, v. 15, n. 3, p. 886-913, 2015. https://doi.org/10.14488/1676-1901.v15i3.1867.
[5] Cruz, T. (2011) “Sistemas, Métodos e Processos: Administrando Organizações por meio de Processos de Negócios”, 2°. edição. – São Paulo: Atlas, 2011.
[6] MARTINS, P. V.; ZACARIAS, M. An Agile Business Process Improvement Methodology. Procedia Computer Science, v. 121, p. 129–136, 2017. https://doi.org/10.1016/j.procs.2017.11.018.
[7] ENSSLIN, L.; et al. BPM governance: a literature analysis of performance evaluation. Business Process Management Journal, v. 23, n. 1, pp. 71-86, 2017. https://doi.org/10.1108/BPMJ-11-2015-0159.
[8] MIYAZAKI, T. et al. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dental materials journal. Japan, p. 1-13, 2009.
[9] Rinke S, Fornefett D, Gersdorff N, Lange K, Roediger M. Multifactorial analysis of the impact of different manufacturing processes on the marginal fit of zirconia copings. Dent Mater J. 2012;31 (4):601 -9.
[10] BISCARO, L. et al. An In Vivo Evaluation of Fit of Zirconium-Oxide Based Ceramic Single Crowns, Generated with Two CAD/CAM Systems, in Comparison to Metal Ceramic Single Crowns. Journal of Prosthodontics, v. 22 , 2013.
[11] VANLIOGLU, B. A. et al. Internal and marginal adaptation of pressable and computer-aided design/computer-assisted manufacture onlay restorations. International Journal of Prosthodontics, v. 25, n. 3, 2012.
Downloads
Published
2019-11-01
Issue
Section
Journal Articles
License
Copyright (c) 2019 Jorge Fernando Rodrigues Valente, Giliane Corrêa Pereira, David Barbosa de Alencar, Carlos Alberto Oliveira de Freitas, Antônio Estanislau Sanches
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Fernando Rodrigues Valente, J., Corrêa Pereira, G., Barbosa de Alencar, D., Oliveira de Freitas, C. A., & Estanislau Sanches, A. (2019). CAD / CAM Application for the Development of Submerged Pump Maintenance Tools. International Journal for Innovation Education and Research, 7(11), 817-828. https://doi.org/10.31686/ijier.vol7.iss11.1937
Most read articles by the same author(s)
- Helena Fernandes de Oliveira, Osnilda dos Santos Mota, Fabiana Rocha Pinto, David Barbosa de Alencar, Frank Henrique Santos Fontineles, Sara dos Santos Santarém, Davi Samuel Dias Maia, Descriptive Analysis of Advantages and Disadvantages of Expanded Polystyrene Monolytic Panels - EPS , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- José Haroldo da Costa Bentes Júnior, Rodson Henrique Hatahara da Fonseca, Livia da Silva Oliveira, Marcela Sávia Picanço Pessoa, David Barbosa de Alencar, A Solar Powered Electronic Device Charging Station , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- André Lopes de Araújo, Nelson Silva da Cruz Júnior, Sara dos Santos Santarém, David Barbosa de Alencar, Sustainable Urban Furniture Development Project Reusing Container , International Journal for Innovation Education and Research: Vol. 7 No. 9 (2019): International Journal for Innovation Education and Research
- Reissa Sousa Silva, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Kaizen Philosophy Application as Production Standardization and Process Optimization , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Leonardo da Silva Carvalho, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Mauro Cezar Aparício de Souza, Application of Reverse Logistics of Waste Tires and their Proper Destination , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Erika Santos Queiroz, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Marden Eufrasio dos Santos, Application of PDCA Cycle Methodology in Management of Continuous Improvement in Receiving and Movement Logistics , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Josielma Ladislau Batista, Livia da Silva Oliveira, David Barbosa de Alencar, Ricardo Silva Parente, Accident Prevention in Electrical Installations at Construction Sites in Manaus - Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 10 (2019): International Journal for Innovation Education and Research
- Dornelles Castro de Oliveira, Francisco de Assis da Silva Júnior, Victor Matias de Souza, Bruno Pereira Gonçalves, Rilmar Pereira Gomes, David Barbosa de Alencar, Jean Mark Lobo de Oliveira, Management in Production of Fish Farming Using Arduino , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Rodrigo da Silva Siqueira, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Mauro Cezar Aparício de Souza, Proposal to Implement 5S in a PIM Gym Equipment Company , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- José Augusto da Costa Brandão, Livia da Silva Oliveira, David Barbosa de Alencar, Carlos Alberto Oliveira de Freitas, A proposal for an Atmospheric Discharge Protection System (ADPS) for a Public School in the City of Manaus-AM , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research