CAD / CAM Application for the Development of Submerged Pump Maintenance Tools
DOI:
https://doi.org/10.31686/ijier.vol7.iss11.1937Keywords:
CAD / CAM, Maintenance tools, MachiningAbstract
The design and implementation of maintenance tools is used in CAD / CAM tools, in order to make the necessary improvements in the whole process of disassembly of the equipment in question, and mainly to reduce the process time and eliminate the risk. breaking the most fragile parts of the equipment. The objective of the work is to elaborate the toolkit, to reduce the disassembly time and to eliminate damage to the equipment and its respective trajectories, with which the machine performs the machining of the designed drawing, were applied to the resources through a CNC language. (Computer Numeric Command) on a CNC lathe and a machining center. The elaboration of this project based on a CAD system, in this case Solid Works. The average time for disassembly of the equipment was around 2h, now with the proper use of tools, the same process had a time drop to 40 minutes, seen as a great time saving in the disassembly process.
Downloads
References
[2] BIDER, I.; JALALI, A. Agile business process development: why, how and when— applying Nonaka’s theory of knowledge transformation to business process development. v. 14, p. 693-731, 2016.
[3] Capote, G. (2011) “Guia para Formação de Analistas de Processos – BPM”, 1ª edição, Rio de Janeiro, 2011, 328p.
[4] KLUSKA, R. A.; LIMA, E. P.; COSTA, S. E. G. Uma proposta de estrutura e utilização do Gerenciamento de Processos de Negócio (BPM). Revista Produção Online, v. 15, n. 3, p. 886-913, 2015. https://doi.org/10.14488/1676-1901.v15i3.1867.
[5] Cruz, T. (2011) “Sistemas, Métodos e Processos: Administrando Organizações por meio de Processos de Negócios”, 2°. edição. – São Paulo: Atlas, 2011.
[6] MARTINS, P. V.; ZACARIAS, M. An Agile Business Process Improvement Methodology. Procedia Computer Science, v. 121, p. 129–136, 2017. https://doi.org/10.1016/j.procs.2017.11.018.
[7] ENSSLIN, L.; et al. BPM governance: a literature analysis of performance evaluation. Business Process Management Journal, v. 23, n. 1, pp. 71-86, 2017. https://doi.org/10.1108/BPMJ-11-2015-0159.
[8] MIYAZAKI, T. et al. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dental materials journal. Japan, p. 1-13, 2009.
[9] Rinke S, Fornefett D, Gersdorff N, Lange K, Roediger M. Multifactorial analysis of the impact of different manufacturing processes on the marginal fit of zirconia copings. Dent Mater J. 2012;31 (4):601 -9.
[10] BISCARO, L. et al. An In Vivo Evaluation of Fit of Zirconium-Oxide Based Ceramic Single Crowns, Generated with Two CAD/CAM Systems, in Comparison to Metal Ceramic Single Crowns. Journal of Prosthodontics, v. 22 , 2013.
[11] VANLIOGLU, B. A. et al. Internal and marginal adaptation of pressable and computer-aided design/computer-assisted manufacture onlay restorations. International Journal of Prosthodontics, v. 25, n. 3, 2012.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Jorge Fernando Rodrigues Valente, Giliane Corrêa Pereira, David Barbosa de Alencar, Carlos Alberto Oliveira de Freitas, Antônio Estanislau Sanches
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Most read articles by the same author(s)
- Ronaldo Lopes Gomes, Ricardo Chamy do Nascimento, Caio Victor da Silva Viga, Bruno Pereira Gonçalves, Jean Mark Lobo de Oliveira, Rilmar Pereira Gomes, David Barbosa de Alencar, Introduction of Basic Computer Programming Logic in Elementary and High Schools Using Logic Block , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Adriana Karla de Souza Santana, Elilson Leal de Araújo, Waldeck Matheus de Oliveira Lins Belo, Bruno Pereira Gonçalves, Jean Mark Lobo de Oliveira, Rilmar Pereira Gomes, David Barbosa de Alencar, Hybrid Mobile Prototype for Evapotranspiration Calculation Using Raspberry Pi , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- João Vitor Barros Assunção, Renan Phelipe Rodrigues Pantoja, Bruno Pereira Gonçalves, David Barbosa de Alencar, Jean Mark Lobo de Oliveira, Comparative Analysis Between Native and Hybrid Mobile Applications , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Dayana de Lira Martins da Silva, Flavia Emanuele Rosas Costa, Igor Bezerra de Lima, David Barbosa de Alencar, Ricardo Silva Parente, Proposals for Reducing Damage Caused by Dams Collapse in Pitinga - Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Paulo Moisés Godinho Feitosa, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Manoel Henrique Reis Nascimento, Scrap Cost Reduction Process Improvement Actions in a Microwave Assembly Plant , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- João Bosco Rodrigues Pereira, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Methodology for Indirect Material Control in a White Line Company , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Gabriel Barbosa Soares, Djanielson de Oliveira Pereira, Livia da Silva Oliveira, David Barbosa de Alencar, Manoel Henrique Reis Nascimento, Implementation of the TN-C-S Scheme in an Ungrounded Low Voltage Electrical Installation in Manaus / AM , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Jessica Santana da Silva, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes, Energy Efficiency Analysis in a Higher Education Institution in Manaus - Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Nilzemar da Silva Mariano, Livia da Silva Oliveira, David Barbosa de Alencar, Eliton Smith dos Santos, Economic Feasibility Study Generated on Replacing Tubular Fluorescent Lamps with Led Lamps in a Commercial Building , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Alessandro Marques Martins, Érica Pantoja de Araújo, Frank Henrique Santos Fontineles, Sara dos Santos Santarém, David Barbosa de Alencar, Gisele de Freitas Lopes, The Socioeconomic Impact of Paralyzed Public Works: Analysis on the University City of the State of Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research