CAD / CAM Application for the Development of Submerged Pump Maintenance Tools
DOI:
https://doi.org/10.31686/ijier.vol7.iss11.1937Keywords:
CAD / CAM, Maintenance tools, MachiningAbstract
The design and implementation of maintenance tools is used in CAD / CAM tools, in order to make the necessary improvements in the whole process of disassembly of the equipment in question, and mainly to reduce the process time and eliminate the risk. breaking the most fragile parts of the equipment. The objective of the work is to elaborate the toolkit, to reduce the disassembly time and to eliminate damage to the equipment and its respective trajectories, with which the machine performs the machining of the designed drawing, were applied to the resources through a CNC language. (Computer Numeric Command) on a CNC lathe and a machining center. The elaboration of this project based on a CAD system, in this case Solid Works. The average time for disassembly of the equipment was around 2h, now with the proper use of tools, the same process had a time drop to 40 minutes, seen as a great time saving in the disassembly process.
Downloads
References
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Jorge Fernando Rodrigues Valente, Giliane Corrêa Pereira, David Barbosa de Alencar, Carlos Alberto Oliveira de Freitas, Antônio Estanislau Sanches
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
- Abstract 378
- PDF 223
Most read articles by the same author(s)
- Leticia Caroline Praia da Cunha, Bruno Pereira Gonçalves, Jean Mark Lobo de Oliveira, Odair Cristiano Abreu da Silva, David Barbosa de Alencar, Application of BYOD in digital inclusion in the elderly municipal park - Doctor Thomas , International Journal for Innovation Education and Research: Vol. 8 No. 4 (2020): International Journal for Innovation Education and Research
- Célio Nascimento Vinhorte, David Barbosa de Alencar, Alexandra Priscillar Tregue Costa, Antônio Estanislau Sanches, A Proposal to Implement a Business Guidance Service (BGS) Manual Based on Business Process Management (BPM) Methodology: A Case Study in a Public Company in the Amazonas State , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Jamilson Marialva do Nascimento, Livia da Silva Oliveira, Aristeu Souza da Fonseca, David Barbosa de Alencar, Manoel Henrique Reis Nascimento, Prototype Development Open Source Platform-Based Electricity Meter with Minimum Rate of Change According to Module Five of the Electricity Distribution Procedure in the Brazilian National Electrical System (PRODIST) , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- George Lucas Silva de Sousa, Pedro Jose Fonseca Neto, Bruno Pereira Gonçalves, Jean Mark Lobo de Oliveira, David Barbosa de Alencar, Optimization and cost reduction with performance improvements on web pages , International Journal for Innovation Education and Research: Vol. 8 No. 6 (2020): International Journal for Innovation Education and Research
- Fábio Gomes Cantuário, Luiz Eduardo Santos de Araújo, Rilmar Pereira Gomes, David Barbosa de Alencar, The application of data mining by classification in a database of notified covid-19 cases in Manaus-AM , International Journal for Innovation Education and Research: Vol. 9 No. 4 (2021): International Journal for Innovation Education and Research
- Aline Azevedo Eleutério, Alexandra Priscilla Tregue Costa, David Barbosa de Alencar, Antônio Estanislau Sanches, MWO Line Optimization Applying Lean Manufacturing Methodology: PIM Case Study , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Letícia Bindá Gondim, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, A project proposal for a truffle micro-enterprise , International Journal for Innovation Education and Research: Vol. 7 No. 10 (2019): International Journal for Innovation Education and Research
- Diego da Silva de Souza, Paulo de Souza Silva, David Barbosa de Alencar, Comparative analysis of compact fluorescent lamps versus led lamps , International Journal for Innovation Education and Research: Vol. 8 No. 11 (2020): International Journal for Innovation Education and Research
- Antônio Gelcivan Carvalho Feitosa, Márcio Ribeiro da Silva, Matheus Nery de Souza Ferreira, Bruno Pereira Gonçalves, Jean Mark Lobo de Oliveira, Rilmar Pereira Gomes, David Barbosa de Alencar, The Impact of Mobile Phone Use on Adolescent Health , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Diógenes Quéops de Jesus Guimarães Suzuki, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Manoel Henrique Reis Nascimento, Optimization of the Perfumery Industry Production Process with the Replacement of Raw Material , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research