The Assessment of the Environmental Impact of Selected Plastics
DOI:
https://doi.org/10.31686/ijier.vol8.iss11.2730Keywords:
LCA, plastics, environment, recyclingAbstract
The present article deals with a method of the environmental Life Cycle Assessment (LCA) as a tool for the evaluation of environmental burden of selected products. The assessment of the life cycle of individual products should be carried out while considering emissions released during production, use and disposal of products and during processes of raw material extraction, production of materials and energy, auxiliary processes or sub-processes.
References
Antelava A. and et. (2019). Plastic Solid Waste (PSW) in the Context of Life Cycle Assessment (LCA) and Sustainable Management. In Environmental Management (64) p. 230 -240. DOI: https://doi.org/10.1007/s00267-019-01178-3
Zhang, B., Muxi, K. (2013). Life-Cycle Assessment for Plastic Waste Recycling Process: Based of the Network Evaluation Framework. In: Nee A., Song B., Ong SK. p. 377-382. DOI: https://doi.org/10.1007/978-981-4451-48-2_62
Cabeza LF, Vilariño LRV, Pérez G, Castell A (2014) Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: a review. Renew Sust Energ rev 29. p. 394–416. DOI: https://doi.org/10.1016/j.rser.2013.08.037
ENVI-PAK. Dostupné na: https://envipak.sk/clanok/Posudzovanie-zivotneho-cyklu-LCA
Joshi, S. (2000). Product Environmental Life−Cycle Assessment Using Input−Output Techniques, Journal of Industrial Ecology 3 (2−3). p. 95−120. DOI: https://doi.org/10.1162/108819899569449
Goodship V. (2007). Plastic recycling. In Science Progress 90 (4). p. 245-68. DOI: https://doi.org/10.3184/003685007X228748
Downloads
- PDF 182 179
Published
Issue
Section
License
Copyright (c) 2020 Lubica Bednarova
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Accepted 2020-10-18
Published 2020-11-01
Share
Most read articles by the same author(s)
- Lubica Bednarova, Lukáš Tóth, Tomáš Brestovič, Natália Jasminská, Marián Lázár, Romana Dobáková, Thermal and energy balance of a fuel cell during hydrogen supply from metal hydride materials , International Journal for Innovation Education and Research: Vol. 8 No. 11 (2020): International Journal for Innovation Education and Research
- Lubica Bednarova, Tomáš Brestovič, Natália Jasmisnká, Marián Lázár, Romana Dobáková, Lukáš Tóth, The impact of metal hydride material activation to storage percentage of hydrogen in this material , International Journal for Innovation Education and Research: Vol. 8 No. 1 (2020): International Journal for Innovation Education and Research
- Ľubomíra Kmeťová, Marián Lázar, Natália Jasminská, Romana Dobáková, Potential Applications of Vitrified Slag as a Product of Plasma Arc Melting , International Journal for Innovation Education and Research: Vol. 9 No. 11 (2021): International Journal for Innovation Education and Research
- Lubica Bednarova, Lukáš Tóth, Filip Duda, Ľubomíra Kmeťová, Tribological test of compressor used in the refrigeration industry , International Journal for Innovation Education and Research: Vol. 8 No. 11 (2020): International Journal for Innovation Education and Research
- Lubica Bednarova, Lukáš Tóth, Tomáš Brestovič, Natália Jasminská, Marián Lázár, Romana Dobáková, Possibilities of utilization of waste heat of synthesis gas , International Journal for Innovation Education and Research: Vol. 8 No. 1 (2020): International Journal for Innovation Education and Research
- Lukas Toth, Tomas Brestovic, Natalia Jasminska, Absorption of Hydrogen in the HBond©9000 Metal Hydride Tank , International Journal for Innovation Education and Research: Vol. 6 No. 11 (2018): International Journal for Innovation Education and Research
- Marián Lázár, Filip Duda, Ľubomíra Kmeťová, Natália Jasminská, Šimon Hudák, Design and calculation of heat transfer of the passive cooling modules for low-pressure hydrogen vessels , International Journal for Innovation Education and Research: Vol. 9 No. 11 (2021): International Journal for Innovation Education and Research
- Filip Duda, Šimon Hudák, Tomáš Brestovič, Marián Lázár, Design of internal heat transport intensifier for metal hydride storage tank , International Journal for Innovation Education and Research: Vol. 9 No. 11 (2021): International Journal for Innovation Education and Research
- Lukas Toth, Natalia Jasminska, Tomas Brestovic, Romana Dobakova, Model of a Hydrogen Vehicle Driven by a Fuel Cell and Metal Hydride Materials , International Journal for Innovation Education and Research: Vol. 6 No. 11 (2018): International Journal for Innovation Education and Research
- Romana Dobáková, Natália Jasminská, Tomáš Brestovič, Marian Lazár, Jiří Marek, Heat exchange on the outside of the pipe when heat is distributed by heat networks , International Journal for Innovation Education and Research: Vol. 5 No. 9 (2017): International Journal for Innovation Education and Research