Analysis of the operating conditions of a hydraulic turbine of the bulb-type

Adriano Delmaschio Cella; Maicon Maciel Ferreira de Araújo; Cléver Reis Stein

doi:10.31686/ijier.vol9.iss12.3566

Authors

Adriano Delmaschio Cella Faculdade Metropolitana
Maicon Maciel Ferreira de Araújo Faculdade Metropolitana
Cléver Reis Stein Instituto Federal de Rondônia https://orcid.org/0000-0003-3667-945X

DOI:

https://doi.org/10.31686/ijier.vol9.iss12.3566

Keywords:

Preventive maintenance, dynamic test, bulb-type

Abstract

In the last decades we have witnessed a technological advance and the search for 4.0 technologies, in this scenario, one of the most important topics to promote a good performance in the production of equipment is the monitoring of operation through preventive maintenance, especially for large industrial enterprises. In this article we present a dynamic test and an analysis of the operating conditions of a hydraulic turbine of the bulb-type operating with a production level of 70 MW. The results demonstrate the vibrations at different points of the equipment and the frequency of turning of the blades. Through these results it was possible to demonstrate the operating condition of the device.

Downloads

Download data is not yet available.

Author Biographies

Adriano Delmaschio Cella, Faculdade Metropolitana

Current Position, Dept. of Education Electrical Engineering.
Maicon Maciel Ferreira de Araújo, Faculdade Metropolitana

Current Position, Dept. of Education Electrical Engineering
Cléver Reis Stein, Instituto Federal de Rondônia

Current Position, Dept. of Physics Education.

References

BARILLI, R. J. C. Análise de Falhas em Mancais de Rolamento Utilizando a Técnica do Envelope. POLI-UFRJ, Universidade Federal do Rio de Janeiro Escola Politécnica Engenharia Naval e Oceânica. Rio de janeiro, RJ. Cap. 3, p. 8-23 2013

INMAN, D. J. Engineering vibration. 2 nd Edition, New Jersey: Prentice Hall, 560p, 2001.

FONSECA JUNIOR, M. Pré despacho de carga em usinas termoelétricas considerando a gestão da manutenção via lógica FUZZY. Tese (Doutorado) - Universidade Federal do Pará. Belém 2018.

MARTIN, H. R., Honarvar, F. Application of Statistical Moment to Bearing Failure Detection, Applied Acoustics. Vol. 44, pp. 67-77, 1995. DOI: https://doi.org/10.1016/0003-682X(94)P4420-B

MELO, Antônio. Tipos de turbinas hidráulicas aplicadas às pequenas, mini e microcentrais hidráulicas. Disponível em: http://meusite.mackenzie.com.br/mellojr/. Acesso em: 22 ago. 2020.

MITCHELL, John S. Machinery Analysis and Monitoring. Oklahoma: Penn Well Books, U.S.A., 1993, 566p.

SANTOS, P. S. B.; RAMOS, R. A. V.; FIOMARI, M. C.; WOISKI, E. R.; MORETI, T. C. F. Performance analysis of a condensation-extraction steam turbine operating in a sugar-alcohol factory cogeneration system. International Jounal For Innovation Education and Research, vol. 7(8), 2019. DOI: https://doi.org/10.31686/ijier.vol7.iss8.1675

TANDON, N. and Choudhury, A. A Review of Vibration and Acoustic Measurement Methods for the Detection of Defects in Rolling Element Bearings, Tribology International. Vol. 32, pp. 469-480, 1999. DOI: https://doi.org/10.1016/S0301-679X(99)00077-8

VASCONCELLOS R.C.; UEMORI M.; TOMAS L. A aplicação de unidades bulbo e kaplan vertical em aproveitamentos de médias potências e baixas quedas. SNPTEE. Rio de Janeiro, 2007.

YAMAMOTO, K. G. Desenvolvimento de um sistema de detecção de falhas de desbalanceamento, on-line, baseado em FPGA para aplicação em máquinas rotativas de indução. Tese (Mestrado) - Instituto Federal de Educação, Ciência e Tecnologia de São Paulo. Campinas, 2016.