Analysis on Feasibility and Technology Transfer in Civil Construction
Capability Matrix in Conjunction with Ergonomic Strategies
DOI:
https://doi.org/10.31686/ijier.vol10.iss10.3970Keywords:
Technology Transfer, feasibility, Anthropology, Civil ConstructionAbstract
Technological changes brought a need to review the architecture of operational activities, and it was up to ergonomics to turn to what would be called “external variables”, technological variables and sociological variables. The objective of this research is to build and test a tool that can guide the strategic actions of Ergonomics as to evaluating the feasibility of projects, in the operational phase, as well as in the technology transfer that these projects may present. For this work, the Methodology used was divided into two parts: building of the research portfolio and building details as to the Project Feasibility Analysis model. Based on the results found through the development of a tool to guide Ergonomics, by means of the operational feasibility of the project, in combination with technology transfer, a tool called Capability Matrix was built, which proved to be flexible and efficient, having a greater potential compared to that of its initial design. This investigation leaves as a perspective for future works the application of the matrix to other civil construction activities, in addition to enabling technology transfer to other activities belonging to civil construction and the industry in general.
References
Akanmu, A. A., Olayiwola, J., Ogunseiju, O., & McFeeters, D. (2020). Cyber-physical postural training system for construction workers. Automation in Construction, 117 doi:10.1016/j.autcon.2020.103272 DOI: https://doi.org/10.1016/j.autcon.2020.103272
Anton, D., Bray, M., Hess, J. A., Weeks, D. L., Kincl, L. D., & Vaughan, A. (2020). Prevalence of work-related musculoskeletal pain in masonry apprentices. Ergonomics, 63(9), 1194-1202. doi:10.1080/00140139.2020.1772380 DOI: https://doi.org/10.1080/00140139.2020.1772380
Aminbakhsh, S.; Gunduz, M.; Sonmez, R. Safety risk assessment using analytic hierarchy process (AHP) during planning and budgeting of construction projects. J. Saf. Res. 2013, 46, 99–105 DOI: https://doi.org/10.1016/j.jsr.2013.05.003
BiyiklI, O.; Aydogan, E.K. A New Model Suggestion to Estimate the Probability Value in Occupational Health and Safety Risk Assessment. Appl. Math. Inf. Sci. 2016, 10, 663–671. DOI: https://doi.org/10.18576/amis/100226
Brege, S., Nord, T., & Stehn, L. (2017). Industriellt byggande i trä-nuläge och prognos mot 2025. Stockholm: Sveriges Träbyggnadskansli.
Campus E. A. R., Pagani, R. N., Resende, L. M. & Pontes J (2018) Construction and qualitative assessment of a bibliographic portfolio using the methodology Methodi Ordinatio. Scientometrics 116(2):815–842 DOI: https://doi.org/10.1007/s11192-018-2798-3
Corsi, A., Souza, F. F., Pagani, R. N. & Kovaleski, J. L. (2020). Big data analytics as a tool for fighting pandemics: a systematic review of literature. Journal of Ambient Intelligence and Humanized Computing, doi: https://doi.org/10.1007/s12652-020-02617-4 DOI: https://doi.org/10.1007/s12652-020-02617-4
Csáfordi, Z., Lorincz, L., Lengyel, B & Kiss, K. M. (2020). Productivity spillovers through labor flows: productivity gap, multinational experience and industry relatedness. The Journal of Technology Transfer, 45, 86-121. Doi: https://doi.org/10.1007/s10961-018-9670-8 DOI: https://doi.org/10.1007/s10961-018-9670-8
De Laet, M., & Mol, A. (2000). The Zimbabwe bush pump: Mechanics of a fluid technology. Social Studies of Science, 30(2), 225–263. DOI: https://doi.org/10.1177/030631200030002002
Deloitte. (2019). GPoC 2018. Global Powers of Construction. Infrastructure Department, Deloitte Madrid, Spain.
Dubois, A., & Gadde, L. (2002). The construction industry as a loosely coupled system: Implications for productivity and innovation. Construction Management and Economics, 20(7), 621–631. DOI: https://doi.org/10.1080/01446190210163543
Dutta, A., Breloff, S. P., Dai, F., Sinsel, E. W., Warren, C. M., Carey, R. E., & Wu, J. Z. (2020). Effects of working posture and roof slope on activation of lower limb muscles during shingle installation. Ergonomics, 63(9), 1182-1193. doi:10.1080/00140139.2020.1772378 DOI: https://doi.org/10.1080/00140139.2020.1772378
Esmaelli, B.; Hallowell, M. Integration of safety risk data with highway construction schedules. Constr. Manag. Econ. 2013, 31, 528–541 DOI: https://doi.org/10.1080/01446193.2012.739288
Falck, A.C. & Rosenqvist, M. (2012). What are the obstacles and needs of proactive ergonomics measures at early product development stages? - an interview study in five Swedish companies. Int. J. Ind. Ergon. 42, 406e415. DOI: https://doi.org/10.1016/j.ergon.2012.05.002
Gul, M.; Guven, B.; Guneri, A.F. A new Fine-Kinney-based risk assessment framework using FAHP-FVIKOR incorporation. J. Loss Prev. Process Ind. 2018, 53, 3–16. DOI: https://doi.org/10.1016/j.jlp.2017.08.014
Hallowell, M.M.R. A Formal Model for Construction Safety and Health Risk Management; Oregon State University: Corvallis, OR, USA, 2008.
Henderson, B., Stuckey, R., & Keegel, T. (2018). Current and ceased users of sit stand workstations: A qualitative evaluation of ergonomics, safety and health factors within a workplace setting. BMC Public Health, 18(1) doi:10.1186/s12889-018-6296-6 DOI: https://doi.org/10.1186/s12889-018-6296-6
Hess, J. A., Kincl, L., Weeks, D. L., Vaughan, A., & Anton, D. (2020). Safety voice for ergonomics (SAVE): Evaluation of a masonry apprenticeship training program. Applied Ergonomics, 86 doi:10.1016/j.apergo.2020.103083 DOI: https://doi.org/10.1016/j.apergo.2020.103083
Isaac, S.; Edrei, T. A statistical model for dynamic safety risk control on construction sites. Autom. Constr. 2016, 63, 66–78. DOI: https://doi.org/10.1016/j.autcon.2015.12.006
Izobo-Martins, O. O., Ayo-Vaughan, E. O., Badejo, O. O., Ekhaese, E. N., Elenwo, C., & Nwakudu, I. (2018). Safety in construction: Reducing the physical demands on workers in nigeria. International Journal of Civil Engineering and Technology, 9(9), 215-221. Doi:
Jansson, G., Johnsson, H., & Engström, D. (2014). Platform use in systems building. Construction Management and Economics, 32(1–2), 70–82. DOI: https://doi.org/10.1080/01446193.2013.793376
Johnsson, H. (2013). Fånga det industriella byggandet. Luleå: Luleå University of Technology.
Loosemore, M., Braham, R., Yiming, Y., & Bronkhorst, C. (2020). Relational determinants of construction project outcomes: A social network perspective. Construction Management and Economics, 38(11), 1061-1076. doi:10.1080/01446193.2020.1776350 DOI: https://doi.org/10.1080/01446193.2020.1776350
Luz, A. A., de Francisco, A. C., Santos, S. F. M., Soares, A. M. & Kovaleski, J. L. (2016). Sustainable development and conscious consumption: A perception of university interns in the region of Campos Gerais, Parana, Brazil. Interciência (Caracas), 41(5), 312-318.
Katoch, V., & Mohan, S. (2019). Design and fabrication of a safety frame for workers carrying out head lifting at construction sites. Journal of Engineering, Design and Technology, 17(6), 1250-1265. doi:10.1108/JEDT-02-2019-0037 DOI: https://doi.org/10.1108/JEDT-02-2019-0037
Kiel, D., Arnold, C & Voigt, K. I. (2017). The influence of the Industrial Internet of Things on business models of established manufacturing companies – A business level perspective. Technovation, 68, 4-19. Doi: https://doi.org/10.1016/j.technovation.2017.09.003 DOI: https://doi.org/10.1016/j.technovation.2017.09.003
Kincl, L. D., Hess, J. A., Weeks, D. L., Vaughan, A., & Anton, D. (2020). Efficacy of text messaging apprentices to reinforce ergonomics and safety voice training. Journal of Safety Research, 74, 35-43. doi:10.1016/j.jsr.2020.04.007 DOI: https://doi.org/10.1016/j.jsr.2020.04.007
Koskela, L. (2003). Is structural change the primary solution to the problems of construction? Building Research & Information, 31(2), 85–96. DOI: https://doi.org/10.1080/09613210301999
López-Alonso, M., Díaz-Soler, B., Martínez-Rojas, M., Fito-López, C., & Martínez-Aires, M. D. (2020). Management of occupational risk prevention of nanomaterials manufactured in construction sites in the eu. International Journal of Environmental Research and Public Health, 17(24), 1-27. doi:10.3390/ijerph17249211 DOI: https://doi.org/10.3390/ijerph17249211
Malekitabar, H.; Ardeshir, A.; Sebt, M.H.; Stouffs, R. Construction safety risk drivers: A BIM approach. Saf. Sci. 2016, 82, 445–455. Doi: https://doi.org/10.1016/j.ssci.2015.11.002 DOI: https://doi.org/10.1016/j.ssci.2015.11.002
Mučenski, V.; Peško, I.; Dražić, J.; Ćirović, G.; Trivunić, M.; Bibić, D. Construction workers injury risk assessment in relation to their experience and age. Procedia Eng. 2015, 117, 530–538 DOI: https://doi.org/10.1016/j.proeng.2015.08.205
Mure, S.; Demichela, M.; Piccinini, N. Assessment of the risk of occupational accidents using a “fuzzy” approach. Cogn. Technol. Work 2006, 8, 103–112. DOI: https://doi.org/10.1007/s10111-005-0025-5
Ojstersek, R., Buchmeister, B. & Vujica Herzog, N. (2020). Use of data-driven simulation modeling and visual computing methods for workplace evaluation. Applied Sciences, 10(20), 7037. Doi: https://doi.org/10.3390/app10207037 DOI: https://doi.org/10.3390/app10207037
Pagani R. N, Kovaleski, J. L. & Resende, L. M (2015) Methodi Ordinatio: a proposed methodology to select and rank relevant scientific papers encompassing the impact factor, number of citation, and year of publication. Scientometrics 105(3):2109–2135. DOI: https://doi.org/10.1007/s11192-015-1744-x
Pereira, H. S., & Navarro, B. J. (2018). The implementation and development of narrow-gauge railways in portugal as a case of knowledge transfer (c. 1850–c. 1910). Journal of Transport History, 39(3), 355-380. doi:10.1177/0022526618791726 DOI: https://doi.org/10.1177/0022526618791726
Peters, S. E., Trieu, H. D., Manjourides, J., Katz, J. N., & Dennerlein, J. T. (2020). Designing a participatory total worker health® organizational intervention for commercial construction subcontractors to improve worker safety, health, and well-being: The “arm for subs” trial. International Journal of Environmental Research and Public Health, 17(14), 1-15. doi:10.3390/ijerph17145093 DOI: https://doi.org/10.3390/ijerph17145093
Pinto, A.; Nunes, I. L. & Ribeiro, R.A. (2011). Occupational risk assessment in construction industry–Overview and reflection. Saf. Sci., 49, 616–624. DOI: https://doi.org/10.1016/j.ssci.2011.01.003
Rodriguez, F. S., Spilski, J., Hekele, F., Beese, N. O., & Lachmann, T. (2019). Physical and cognitive demands of work in building construction. Engineering, Construction and Architectural Management, 27(3), 745-764. doi:10.1108/ECAM-04-2019-0211 DOI: https://doi.org/10.1108/ECAM-04-2019-0211
Rogers, E. M. (2010). Diffusion of innovations. New York: Simon and Schuster.
Sadeghi, H., Mohandes, S. R., Hosseini, M. R., Banihashemi, S., Mahdiyar, A., & Abdullah, A. (2020). Developing an ensemble predictive safety risk assessment model: Case of malaysian construction projects. International Journal of Environmental Research and Public Health, 17(22), 1-25. doi:10.3390/ijerph17228395 DOI: https://doi.org/10.3390/ijerph17228395
Santos, Z. G. D., Vieira, L., & Balbinotti, G. (2015). Lean manufacturing and ergonomic working conditions in the automotive industry. Procedia Manufacturing, 3, 5947-5954. doi:10.1016/j.promfg.2015.07.687 DOI: https://doi.org/10.1016/j.promfg.2015.07.687
Silva, L. C S., Kovaleski, J. L., Gaia, S., Segundo, G. S. A. & Caten, C. S. T. (2015). The process of technology transfer in brazilian public universities through technological innovation centers. Interciência (Caracas), 40(10), 664-669.
Silva, J. M. N. D., Gontijo, L. A., Bornia, A. C., Silva, L. B. D., Leite, W. K. D. S., Vieira, E. M. D. A., & Torres, M. G. L. (2020). Construction of an osteomuscular discomfort scale for the upper region of the body of footwear industry workers. International Journal of Industrial Ergonomics, 80 doi:10.1016/j.ergon.2020.103048 DOI: https://doi.org/10.1016/j.ergon.2020.103048
Shafiq, M. T. & Afzal, M. (2020). Potential of virtual design construction Technologies to improve job-site safety in Gulf Corporation council. Sustainability, 12(9), 3826. Doi: https://doi.org/10.3390/su12093826 DOI: https://doi.org/10.3390/su12093826
Souza, V.; Almeida, N. M. & Dias, L. A. (2015). Risk-based management of occupational safety and health in the construction industry—Part 2: Quantitative model. Saf. Sci., 74, 184–194 DOI: https://doi.org/10.1016/j.ssci.2015.01.003
Speklé, E. M., Heinrich, J., Hoozemans, M. J., Blatter, B. M.. Van der Beek, A. J., Van Dieen, J. H., Van Tulder, M. V. (2010). The cost- effectiveness of the RSI QuickScan intervation programme for computer workers: results of an economic evalution alongside a randomised controlled trail. BMC Musculoskeltic Disorders, 11, 259. DOI: https://doi.org/10.1186/1471-2474-11-259
Stradioto, J. P. & Michaloski, A. O. (2021). Ergonomic analysis of biomechanical overloading: external coating activity using mortar. Acta Scientiarum. Technology, 43(1), e51335. https://doi.org/10.4025/actascitechnol.v43i1.51335 DOI: https://doi.org/10.4025/actascitechnol.v43i1.51335
Turk, M., Pipan, M., Simic, M., & Herakovic, N. (2020). A smart algorithm for personalizing the workstation in the assembly process. Applied Sciences (Switzerland), 10(23), 1-19. doi:10.3390/app10238624 DOI: https://doi.org/10.3390/app10238624
Uusitalo, P. & Lavikka, R. (2020). Technology transfer in the construction industry. The Journal of Technology Transfer, 1-30. Doi: https://doi.org/10.1007/s10961-020-09820-7 DOI: https://doi.org/10.1007/s10961-020-09820-7
Visser, S., van der Molen, H. F., Sluiter, J. K., & Frings-Dresen, M. H. W. (2018). The process evaluation of two alternative participatory ergonomics intervention strategies for construction companies. Ergonomics, 61(9), 1156-1172. doi:10.1080/00140139.2018.1454514 DOI: https://doi.org/10.1080/00140139.2018.1454514
Vujica Herzog, N. & Harih, G. (2020). Decision support system for designing and assigning ergonomic workplaces to workers with disabilities. Ergonomics, 63, 225–236. DOI: https://doi.org/10.1080/00140139.2019.1686658
Zare, M., Bodin, J., Cercier, E., Brunet, R., & Roquelaure, Y. (2015). Evaluation of ergonomic approach and musculoskeletal disorders in two different organizations in a truck assembly plant. International Journal of Industrial Ergonomics, 50, 34-42. doi:10.1016/j.ergon.2015.09.009 DOI: https://doi.org/10.1016/j.ergon.2015.09.009
Zhang, Y.; Wu, X.; Gao, J.; Chen, J. & Xv, X. (2019). Simulation and ergonomic evaluation of welders’ standing posture using Jack software. Int. J. Environ. Res. Public Health, 16, 4354. Doi:https://doi.org/10.3390/ijerph16224354 DOI: https://doi.org/10.3390/ijerph16224354
Zou, P.X.W.; Lun, P.; Cipolla, D. & Mohamed, S. (2017). Cloud-based safety information and communication system in infrastructure construction. Saf. Sci., 98, 50–69. Doi: https://doi.org/10.1016/j.ssci.2017.05.006 DOI: https://doi.org/10.1016/j.ssci.2017.05.006
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Juliano Prado Stradioto, Ariel Orlei Michaloski, Carlos Honorato Schuch Santos
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
