AAUQ Asphalt Mixtures Using Carbide Lime for Low Traffic Paths in Manaus - AM
DOI:
https://doi.org/10.31686/ijier.vol7.iss10.1770Keywords:
asphalt mixture, paving, traffic volumeAbstract
The asphalt pavements of the residential streets and outskirts of Manaus city are usually made of Hot Machined Asphalt Sand (AAUQ), which is ideal for low traffic roads, not only for the flow of vehicles and use of materials, but also for the economic viability of the project. In this research we used the waste originated from acetylene gas production in factories of the Industrial District, Cal de Carbureto in the composition of asphalt mixtures of type AAUQ, replacing the usual filler, Portland cement. These mixtures were mechanically evaluated with respect to the Diametral Compression Tensile Strength, Resilience Module and Fatigue Life tests, and it was found that the alternative filler presents superior results when compared to the usual used in the asphalt plants of the City.
References
[1] SANT’ANA, W.C. Soluções de Pavimentos Urbanos para Baixo Volume de Tráfego e Cidades Pequenas. 18ª Reunião de Pavimentação Urbana. São Luís, MA, 2012.
[2] CAVALCANTE, D.G., CRISÓSTOMO, P.H.S., SILVA, L.C.P., SOUZA, R.J.Q., GUIMARÃES, D.M.D., FROTA, C.A. Levantamento Visual das Patologias na cidade de Manaus-AM. Revista Teoria e Prática da Engenharia Civil, Brasil. 2012.
[3] IBP – INSTITUTO BRASILEIRO DE PETRÓLEO. Informações básicas sobre materiais asfálticos. Rio de Janeiro: IBP, 1999.
[4] FROTA, C. A., NUNES, F. R. G., e SILVA, C. L. “Estudo da Substituição do Seixo por Agregados Sintéticos de Argila Calcinada.” 12ª Reunião de Pavimentação Urbana. Aracaju, SE, 2003.
[5] FROTA, C.A., SILVA, C.L., SANTOS, M.G.R., SILVA, R.V.P. “Caracterização de Solos para Obtenção de Agregados Sintéticos de argila calcinada.” 35ª Reunião Anual de Pavimentação. Rio de Janeiro, RJ, 2004.
[6] CARDOSO, F.A.; FERNANDES, H.C.; PILEGGI, R.G.; JOHN, V.M. Cal de carbureto como material de construção civil: caracterização. 17º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais. Foz do Iguaçu, PR, Brasil. 2006.
[7] MEDINA, J., e MOTTA, L.M.G. Mecânica dos Pavimentos. 2a. Rio de Janeiro: Imagemaker Interactive, 2005.
[8] PINTO, S. e MOTTA. L.M.G da. Catálogo de Curvas de Fadiga. Boletim Técnico nº 16 da ABPv, 1995.
[9] SANTOS, M.G.R. “Estudo do Comportamento de Agregados Sintéticos de Argila Calcinada para Uso em Revestimentos Asfálticos para Manaus.” Dissertação de Mestrado, Programa de Mestrado em Geotecnia, Universidade de Brasília - UnB, Brasília, DF, Brasil, 2007.
[10] PINTO, S., e PREUSSLER, E.S. Pavimentação rodoviária – conceitos fundamentais sobre pavimentos flexíveis. Rio de Janeiro,RJ.: Copiarte, Copiadora e Artes Gráficas., 2002.
[11] SHRP. “Superior Performance Asphalt Pavements (Superpave). The Product of SHRP Asphalt Research Program. Superpave Series N°. 2.” Strategic Highway Research Program. 1994b.
[12] ASTM - American Society for Testing and Materials. “ASTM C 127-88: Standard Test Method for Specific Gravity and Absorption of Coarse Aggregate.” American Society for Testing and Materials. Philadelphia, Pennsylvania, 1988.
—. “ASTM C 128-93: Standard Test Method for Specific Gravity and Absorption of Fine Aggregate.” American Association of State Highway and Transportation Officials. Philadelphia, Pennsylvania, 1993.
—. “C 131-96: Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine.” American Association of State Highway and Transportation Officials. Philadelphia, Pennsylvania, 1995..
—. “C 136-95: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates.” American Association of State Highway and Transportation Officials. Philadelphia, Pennsylvania, 1995.
—. “D 2041-00: Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures.” American Association of State Highway and Transportation Officials. Philadelphia, Pennsylvania, 2000.
[13] AASHTO - American Association of State Highway and Transportation Officials. “AASHTO T 19-93: Standard Test Method for Unit Weight and Voids in Aggregate.” USA, 1997.
[14] DNER - Departamento Nacional de Infra-Estrutura de Transportes. “DNER ME 043/95: Misturas betuminosas a quente - Ensaio Marshall.” Rio de Janeiro, 1995.
—. “EM 367/97: Material de enchimento para misturas betuminosas.” Rio de Janeiro, 1997.
—. “ME 004/94: Material Betuminoso: determinação da viscosidade Saybolt-Furol a alta temperatura método da película delgada.” Rio de Janeiro, 1994.
—. “ME 085/94: Material finamente pulverizado: Determinação da massa específica real.” Rio de Janeiro, 1994.
—. “ME 138/94: Misturas betuminosas - determinação da resistência à tração.” Rio de Janeiro, 1994.
[2] CAVALCANTE, D.G., CRISÓSTOMO, P.H.S., SILVA, L.C.P., SOUZA, R.J.Q., GUIMARÃES, D.M.D., FROTA, C.A. Levantamento Visual das Patologias na cidade de Manaus-AM. Revista Teoria e Prática da Engenharia Civil, Brasil. 2012.
[3] IBP – INSTITUTO BRASILEIRO DE PETRÓLEO. Informações básicas sobre materiais asfálticos. Rio de Janeiro: IBP, 1999.
[4] FROTA, C. A., NUNES, F. R. G., e SILVA, C. L. “Estudo da Substituição do Seixo por Agregados Sintéticos de Argila Calcinada.” 12ª Reunião de Pavimentação Urbana. Aracaju, SE, 2003.
[5] FROTA, C.A., SILVA, C.L., SANTOS, M.G.R., SILVA, R.V.P. “Caracterização de Solos para Obtenção de Agregados Sintéticos de argila calcinada.” 35ª Reunião Anual de Pavimentação. Rio de Janeiro, RJ, 2004.
[6] CARDOSO, F.A.; FERNANDES, H.C.; PILEGGI, R.G.; JOHN, V.M. Cal de carbureto como material de construção civil: caracterização. 17º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais. Foz do Iguaçu, PR, Brasil. 2006.
[7] MEDINA, J., e MOTTA, L.M.G. Mecânica dos Pavimentos. 2a. Rio de Janeiro: Imagemaker Interactive, 2005.
[8] PINTO, S. e MOTTA. L.M.G da. Catálogo de Curvas de Fadiga. Boletim Técnico nº 16 da ABPv, 1995.
[9] SANTOS, M.G.R. “Estudo do Comportamento de Agregados Sintéticos de Argila Calcinada para Uso em Revestimentos Asfálticos para Manaus.” Dissertação de Mestrado, Programa de Mestrado em Geotecnia, Universidade de Brasília - UnB, Brasília, DF, Brasil, 2007.
[10] PINTO, S., e PREUSSLER, E.S. Pavimentação rodoviária – conceitos fundamentais sobre pavimentos flexíveis. Rio de Janeiro,RJ.: Copiarte, Copiadora e Artes Gráficas., 2002.
[11] SHRP. “Superior Performance Asphalt Pavements (Superpave). The Product of SHRP Asphalt Research Program. Superpave Series N°. 2.” Strategic Highway Research Program. 1994b.
[12] ASTM - American Society for Testing and Materials. “ASTM C 127-88: Standard Test Method for Specific Gravity and Absorption of Coarse Aggregate.” American Society for Testing and Materials. Philadelphia, Pennsylvania, 1988.
—. “ASTM C 128-93: Standard Test Method for Specific Gravity and Absorption of Fine Aggregate.” American Association of State Highway and Transportation Officials. Philadelphia, Pennsylvania, 1993.
—. “C 131-96: Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine.” American Association of State Highway and Transportation Officials. Philadelphia, Pennsylvania, 1995..
—. “C 136-95: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates.” American Association of State Highway and Transportation Officials. Philadelphia, Pennsylvania, 1995.
—. “D 2041-00: Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures.” American Association of State Highway and Transportation Officials. Philadelphia, Pennsylvania, 2000.
[13] AASHTO - American Association of State Highway and Transportation Officials. “AASHTO T 19-93: Standard Test Method for Unit Weight and Voids in Aggregate.” USA, 1997.
[14] DNER - Departamento Nacional de Infra-Estrutura de Transportes. “DNER ME 043/95: Misturas betuminosas a quente - Ensaio Marshall.” Rio de Janeiro, 1995.
—. “EM 367/97: Material de enchimento para misturas betuminosas.” Rio de Janeiro, 1997.
—. “ME 004/94: Material Betuminoso: determinação da viscosidade Saybolt-Furol a alta temperatura método da película delgada.” Rio de Janeiro, 1994.
—. “ME 085/94: Material finamente pulverizado: Determinação da massa específica real.” Rio de Janeiro, 1994.
—. “ME 138/94: Misturas betuminosas - determinação da resistência à tração.” Rio de Janeiro, 1994.
Downloads
- PDF 114 360
Published
2019-10-01
Issue
Section
Journal Articles
License
Copyright (c) 2019 Herbert Pereira Tomé, Joilson Rocha de Almeida, Livia da Silva Oliveira, David Barbosa de Alencar, Camily Murrieta Vasconcelos Oliveira Bezerra
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
How to Cite
Pereira Tomé, H., Rocha de Almeida, J., da Silva Oliveira, L., Barbosa de Alencar, D., & Murrieta Vasconcelos Oliveira Bezerra, C. (2019). AAUQ Asphalt Mixtures Using Carbide Lime for Low Traffic Paths in Manaus - AM. International Journal for Innovation Education and Research, 7(10), 272-284. https://doi.org/10.31686/ijier.vol7.iss10.1770
Most read articles by the same author(s)
- Wendel Júlio Silva Barroso, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Implementation of 5S Program in a Building Site of a Predial Reform in Manaus City , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Denilson Fernandes Vital, David Barbosa de Alencar, Mauro Cezar Aparício De Souza, Alexandra Priscilla Tregue Costa, Francisco Carlos Tavares Amorim, Ana Jaqueline Travessa Amorim, Carlos Eduardo de Oliveira, Optimization of the Production Process of Sealing Bricks in a Ceramic Factory in Urucurituba City in Amazonas – Brazil , International Journal for Innovation Education and Research: Vol. 7 No. 10 (2019): International Journal for Innovation Education and Research
- Samuel Cameli Fernandes, Laerte Melo Barros, Rodrigo Paz Barros, Pedro Felix Liotto, David Barbosa de Alencar, Concrete Production Using Fine Glass Aggregates as Partial Replacement of Sand , International Journal for Innovation Education and Research: Vol. 7 No. 12 (2019): International Journal for Innovation Education and Research
- Lourival Cordeiro da Silva, Viviane Cristiny dos Santos Mendonça, Igor Bezerra de Lima, David Barbosa de Alencar, Camily Murrieta Vasconcelos Oliveira Bezerra, Preventive and Corrective Predial Inspection and Maintenance: A Case Study in a Residential Building in Amazonas , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Lucas Dias Melo, Jeann Alef Pereira Rodrigues, Kalebe Carmo Caldas, Bruno Pereira Gonçalves, Jean Mark Lobo de Oliveira, David Barbosa de Alencar, Mobile App Interface Development for Tourism , International Journal for Innovation Education and Research: Vol. 7 No. 10 (2019): International Journal for Innovation Education and Research
- Hemerson Allan Silva de Moraes, Bruno Pereira Gonçalves, Aline Mary Moreira de Melo, Jean Mark Lobo de Oliveira, David Barbosa de Alencar, Intelligent Automation System in Asset Safety Using Household , International Journal for Innovation Education and Research: Vol. 8 No. 4 (2020): International Journal for Innovation Education and Research
- Diana Trindade Duarte, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Reducing Process Setup in a Smart TV Card Factory , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Tamires Lima de Souza, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Mauro Cezar Aparício de Souza, Proposal for Implementation of a Kanban System in the Auxiliary Inventory Sector in a Auto Parts Company , International Journal for Innovation Education and Research: Vol. 7 No. 10 (2019): International Journal for Innovation Education and Research
- Kédson Cruz da Silva, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Antônio Estanislau Sanches, Application of Swot Analysis in the Distributor Company and Commercial Market Souza Cruz , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research
- Luciano Oliveira de Melo, David Barbosa de Alencar, Alexandra Priscilla Tregue Costa, Marden Eufrasio dos Santos, Transport Logistics Analysis of Amazon Application , International Journal for Innovation Education and Research: Vol. 7 No. 11 (2019): International Journal for Innovation Education and Research