CAD / CAM Application for the Development of Submerged Pump Maintenance Tools
DOI:
https://doi.org/10.31686/ijier.vol7.iss11.1937Keywords:
CAD / CAM, Maintenance tools, MachiningAbstract
The design and implementation of maintenance tools is used in CAD / CAM tools, in order to make the necessary improvements in the whole process of disassembly of the equipment in question, and mainly to reduce the process time and eliminate the risk. breaking the most fragile parts of the equipment. The objective of the work is to elaborate the toolkit, to reduce the disassembly time and to eliminate damage to the equipment and its respective trajectories, with which the machine performs the machining of the designed drawing, were applied to the resources through a CNC language. (Computer Numeric Command) on a CNC lathe and a machining center. The elaboration of this project based on a CAD system, in this case Solid Works. The average time for disassembly of the equipment was around 2h, now with the proper use of tools, the same process had a time drop to 40 minutes, seen as a great time saving in the disassembly process.
Downloads
Published
Issue
Section
License
Copyright (c) 2019 Jorge Fernando Rodrigues Valente, Giliane Corrêa Pereira, David Barbosa de Alencar, Carlos Alberto Oliveira de Freitas, Antônio Estanislau Sanches
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.
