ijier logo

CNC Machine Building Through Open Sources Projects and Programs

Authors

  • André Amorim Gonçalves Xavier

    Unisuam

    Author

  • Flavio Maldonado Bentes

    UFRJ

    Author

  • Marcelo de Jesus Rodrigues da Nóbrega

    CEFET-RJ and Santa Úrsula University, Rio de Janeiro, Brazil

    Author

  • Fabiano Battemarco da Silva Martins

    Santa Úrsula University, Rio de Janeiro, Brazil

    Author

  • Hildson Rodrigues de Queiroz

    Petroleum Engineer (PETROBRAS), Rio de Janeiro, Brazil

    Author

DOI:
https://doi.org/10.31686/ijier.vol8.iss9.2600
Keywords:
Array, Array, Array, Array, Array
Abstract

This research presents a theoretical and practical approach on the construction of a low-cost CNC machine, using as a base model found on the internet. Having his knowledge of movement that in the past was movement only one axis at a time, and in current controls movement on three simultaneous axes. The use of an Arduino micro controller will be the key part of the machine's operation, since it behaves like a PLC, starting from basic to advanced programming. The use of the project will end in its academic use and the dissemination of the technology used

Author Biographies
  1. André Amorim Gonçalves Xavier, Unisuam

    Mechanical Engineer

  2. Flavio Maldonado Bentes, UFRJ

    Post-Doctor in Mechanical Engineering

  3. Marcelo de Jesus Rodrigues da Nóbrega, CEFET-RJ and Santa Úrsula University, Rio de Janeiro, Brazil

    Professor at UNIGAMA

  4. Fabiano Battemarco da Silva Martins, Santa Úrsula University, Rio de Janeiro, Brazil

    Professor at UNIGAMA

  5. Hildson Rodrigues de Queiroz, Petroleum Engineer (PETROBRAS), Rio de Janeiro, Brazil

    Professor at UNISUAM

References

AZEVEDO, Américo Luiz de. The beginnings of Computer Numerical Control. 2008 Available at: <https://www.cimm.com.br/portal/publicacao/220-os-primordios-do-controle-numerico>, Accessed on: 09 de jun. 2020

BETIOL, W. E. G., Stepper motor control applied to dot matrix printers. Curitiba, 1989.145 p.

COSTA, E. S. “Discipline: Machining Process”. Divinópolis, MG. 2006. 6 p. Available at:<https://www.passeidireto.com/multiplologinreturnUrl=%2Farquivo%2F2612591%2Fapo stila-processes-de-machining-cefet-mg>, Accessed on: 10 jun. 2020.

GROOVER, Mikell. Industrial Automation and Manufacturing Systems. 3rd Edition. São Paulo: CW, 2010.

KASSOUF, S. Elastic coupling without gap. Current mechatronics, São Paulo, December 2004. Number 19, 52 p.

LAMB, Frank. Industrial Automation in Practice. 2015 Available at: <https://books.google.com.br/books/about/Automa%C3%A7%C3%A3o_Industrial_na_Pr%C3%A1tica_S%C3%A9ri.html?id=X5XzCQAAQBAJ&redir_esc=y>, Acesso em 09 de jun.2020.

MACHADO, A. R. et al. Theory of material machining. 3rd ed. São Paulo: Blucher, 2015.

MAGGIO, Eduardo Gomes Ribeiro et al. A heuristic for scheduling the production of flexible manufacturing systems using modeling in Petri nets. 2005.

SANTOS, S. C.; SALES, W. F. Fundamentals of material machining. Belo Horizonte: CEFET-MG and PUC MINAS, Apostila, 2004.

SCHNEIDER. NEMA size 17 1.8 ° 2-phase stepper motor. [S.l: s.n., 2020]. Available in:<http://motion.schneider-electric.com/downloads/quickreference/NEMA17.pdf> Accessed on 31 jul. 2020.

STOETERAU, Rodrigo Lima. Design of Modern Machine Tools. Available at <http://sites.poli.usp.br/d/pmr2202/arquivos/aulas/PMR2202-AULA%20RS1.pdf> 2014. Federal University of Santa Catarina. Florianópolis, 2014. Accessed on 25 Mar. 2020.

SOUZA, Fabio. What is Arduino? 2013. Available at: <https://www.embarcados.com.br/arduino-uno/> Accessed on: 14 feb. 2020.

SOUZA, Adriano Fagali de; ULBRICH, Cristiane Brasil Lima. Integrated computer engineering and CAD / CAM / CNC systems. 2. ed. São Paulo: Artliber, 2013. Available at: <https://artliber.com.br/index.php?route=product/product&product_id=74> Accessed on 09 June. 2020.

Downloads
Published
2020-09-01
Issue
Vol. 8 No. 9 (2020): International Journal for Innovation Education and Research
Section
Journal Articles
License

Copyright (c) 2020 André Amorim Gonçalves Xavier, Flavio Maldonado Bentes, Marcelo de Jesus Rodrigues da Nóbrega, Fabiano Battemarco da Silva Martins, Hildson Rodrigues de Queiroz

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.

How to Cite

Xavier, A. A. G. ., Bentes, F. M. ., Nóbrega, M. de J. R. da ., Silva Martins, F. B. da ., & Queiroz, H. R. de . (2020). CNC Machine Building Through Open Sources Projects and Programs. International Journal for Innovation Education and Research, 8(9), 108-118. https://doi.org/10.31686/ijier.vol8.iss9.2600