Study of The Extrusion and Painting Process of Aluminum Profiles of a Metal-Mechanical Industry Located in the South of Santa Catarina

• Alice Ferraz de Souza

  Universidade do Extremo Sul Catarinense

  Author

• Kristian Madeira

  Universidade do Extremo Sul Catarinense – UNESC

  https://orcid.org/0000-0002-0929-9403

  Author

• Vilson Menegon Bristot

  Universidade do Extremo Sul Catarinense

  https://orcid.org/0000-0003-1814-6262

  Author

• Milla Lúcia Ferreira Guimarães

  Universidade do Extremo Sul Catarinense – UNESC

  Author

• Márcio Carlos Just

  Universidade do Extremo Sul Catarinense – UNESC

  https://orcid.org/0000-0002-0689-9139

  Author

• Leopoldo Pedro Guimarães Filho

  Universidade do Extremo Sul Catarinense – UNESC

  https://orcid.org/0000-0001-7332-0943

  Author

In the competitive scenary of the 21st century, organizations need to deal with the reality that in order to obtain an above-average return, it is necessary to be willing to meet high quality standards. This article consists of studying the extrusion and painting processes of an aluminum profiles and frames manufacturer, located in the south of Santa Catarina, in order to analyze and measure, through the use of quality tools and statistical software, faults and errors arising from this process. In this context, the research methodology adopted for this study is characterized as exploratory-descriptive, with a quantitative character. The methodological procedure started with an analysis and mapping of the extrusion and painting processes of aluminum profiles, seeking and interpreting information relevant to the study. Then the data was collected and analyzed, where it was possible to apply the Pareto Diagram and identify the most frequent non-conformities. A statistical analysis was then performed using the IBM Statistical Package for the Social Sciences (SPSS) version 21.0 software, comparing and associating the collected data in order to identify and understand the root causes of the defects that occurred. With the results obtained from the analyzes carried out, it became possible to draw up an action plan, using the 5W2H quality tool, containing suggestions and proposals for improvements, with a focus on reducing the scrap generated from the defects identified in the processes of extrusion and painting of aluminum profiles.

1. Alice Ferraz de Souza, Universidade do Extremo Sul Catarinense

   Engenheira de Produção pela Universidade do Extremo Sul Catarinense (UNESC), Grupo de Pesquisa NEEP - Núcleo de Estudos em Engenharia de Produção, Brasil.

2. Kristian Madeira, Universidade do Extremo Sul Catarinense – UNESC

   Doutor em Ciências da Saúde. Docente do Programa de Pós-Graduação Associado em Sistemas Produtivos (PPGSP) entre Uniplac, Unesc, Univille e UnC, Grupo de Pesquisa NEEP - Núcleo de Estudos em Engenharia de Produção, Brasil

3. Vilson Menegon Bristot, Universidade do Extremo Sul Catarinense

   Doutor em Engenharia. Docente do Programa de Pós-Graduação Associado em Sistemas Produtivos (PPGSP) entre Uniplac, Unesc, Univille e UnC, Grupo de Pesquisa NEEP - Núcleo de Estudos em Engenharia de Produção, Brasil.

4. Milla Lúcia Ferreira Guimarães, Universidade do Extremo Sul Catarinense – UNESC

   Doutora em Ciências Ambientais. Docente do Curso de Ciências Contábeis e do MBA Executivo em Controladoria e Finanças Grupo de Pesquisa NECON - Núcleo de Estudos Contábeis, Brasil.

   Grupo de Pesquisa Labdsma: Laboratório de Sociedade, Desenvolvimento e Meio Ambiente.

5. Márcio Carlos Just, Universidade do Extremo Sul Catarinense – UNESC

   Universidade do Extremo Sul Catarinense - UNESC, Brasil – Curso de Licenciatura em Física.

6. Leopoldo Pedro Guimarães Filho, Universidade do Extremo Sul Catarinense – UNESC

   Doutor em Ciências Ambientais. Docente do Programa de Pós-Graduação Associado em Sistemas Produtivos (PPGSP) entre Uniplac, Unesc, Univille e UnC, Grupo de Pesquisa NEEP - Núcleo de Estudos em Engenharia de Produção, Brasil.

• PDF

Copyright (c) 2022 Alice Ferraz de Souza, Kristian Madeira, Vilson Menegon Bristot, Milla Lúcia Ferreira Guimarães, Márcio Carlos Just, Leopoldo Pedro Guimarães Filho

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.